Home/Opel/Meriva/Opel Meriva A (2003-2011)/Repair manual/OHC Petrol Engine/Replace Knock Sensor (Z 16 SE, Lhd)

Contents

Wiring diagrams Section: OHC Petrol Engine

All sections

Replace Knock Sensor (Z 16 SE, Lhd) Opel Meriva A

OHC Petrol Engine 1 illustration

1. Open bonnet
2. Detach knock sensor wiring harness plug (arrow)
3. Raise vehicle
4. Remove knock sensor • Remove bolt (1)

Replace Knock Sensor (Z 16 SE, Lhd)

5. Clean contact surface
6. Install knock sensor • Tighten bolt – Tightening torque 20 Nm

Important. Knock sensor tightening torque must be complied with.

7. Lower vehicle
8. Connect knock sensor wiring harness plug
9. Close bonnet