Important: See "Operations to be Carried Out with TECH 2 when Replacing Control Units".
- 1. Remove glove compartment
- 2. Disconnect battery.
- 3. Remove navigation control unit • Disconnect wiring harness plug (1) • Disconnect aerial cable (2) • Unclip control unit from bracket (3) and remove
- 4. Remove control unit bracket • Remove 2x screw (1) • Remove bracket
- 5. Install bracket • Insert bracket • Tighten 2x bolts
- 6. Fit control unit • Connect wiring harness plug • Connect aerial cable
- 7. Fit glove compartment
- 8. Connect battery
- 9. Program volatile memories
- 10. Operations to be performed with TECH 2 when replacing control units