Home ReviewsRefund
Home/Opel/GT/Opel GT II (2007-2009)/Repair manual/Engine Controls and Fuel - 2.0L/Intake Air Pressure and Temperature Sensor Replacement
Contents Section: Engine Controls and Fuel - 2.0L All sections

Intake Air Pressure and Temperature Sensor Replacement Opel GT II

Engine Controls and Fuel - 2.0L ~105 words

Intake Air Pressure and Temperature Sensor Replacement

Removal Procedure

  1. Disconnect the engine wiring harness electrical connector (2) from the intake air pressure and temperature sensor.
  2. Remove the intake air pressure and temperature sensor bolts.
  3. Remove the intake air pressure and temperature sensor.

Installation Procedure

  1. Lubricate the intake air pressure and temperature sensor O-ring with clean engine oil.
  2. Install the intake air pressure and temperature sensor.
  3. Install the intake air pressure and temperature sensor bolts and tighten to 9 N·m (80 lb in).
  4. Connect the engine wiring harness electrical connector (2) to the intake air pressure and temperature sensor.

More articles — Engine