Checking Program - Air Conditioning Frontera MY'94
Test Instructions
· Be sure that during measurements all other current consumers are switched off (including interior lights).
· Take measurements between the terminals stated in the checking program with the relevant adapter cables from the Electronic Kit I KM - 609.
· When connecting the adapter cables do not use force.
· When checking, the specified sequence of test steps must be followed exactly.
· If at any step the desired nominal value is not reached for a test step, the fault must be eliminated before the next test step is undertaken.
· When using the multimeter, note that the correct range specified in the test steps must always be set before connection of the measuring leads.
· The nominal values given in the checking program are only valid if the multimeter MKM - 587 - A is used.
· This Checking Program is for MY'94 vehicles only. See chapter 4 for other vehicles.