Remove
- 1. Open bonnet
- 2. Disconnect battery • Detach earth connection – Slacken nut
- 3. Detach starter wiring harness • Unscrew 2x nuts (1)
- 4. Remove starter • Unscrew 2x bolts (1)
Install
- 5. Install starter • Tighten 2x bolt 40 Nm
- 6. Attach starter wiring harness • Tighten 2x nuts
- 7. Connect battery • Attach earth connection – Tighten nut
- 8. Program volatile memories
- 9. Close bonnet