Remove
- 1. Open bonnet
- 2. Disconnect battery • Detach earth connection from earth terminal – Slacken nut
- 3. Detach ribbed V-belt
- 4. Disconnect alternator from power supply • Disconnect alternator from power supply – Unscrew 2x nuts (1) and (2)
- 5. Remove alternator • Unscrew 2x bolts (3) and (4)
Install
- 6. Install alternator • Tighten 2x bolt 35 Nm
- 7. Attach wiring harness to alternator • Tighten 2x nuts
- 8. Install ribbed V-belt
- 9. Connect battery • Attach ground connection to ground terminal – Tighten nut
- 10. Programme transient memory
- 11. Close bonnet