Remove
- 1. Remove holder for mobile phone in direction of arrow
- 2. Remove base holder • Unscrew bolt (1) • Remove base holder
- 3. Remove positioning disc • Unscrew 2x bolt (3)
- 4. Remove bracket • Unscrew 2x bolt (2) – Take out bracket
Install
- 5. Install bracket • Unscrew 2x bolt
- 6. Install positioning disc • Drill 2x hole 2 mm • Tighten 2x screw
- 7. Attach base holder • Tighten bolt
- 8. Insert holder for mobile phone