1. Open bonnet
2. Disconnect battery
3. Raise lifting platform
- Half way up
4. Remove front panelling
- 4 bolts (2) and (4), 5 clips (1) and (3)
- Remove ambient temperature sensor
5. Remove wiring harness plug for cooling module control unit
- Release wiring harness plug (2) and (3) in direction of arrow and detach
6. Remove cooling module control unit (1)
- 2 bolts
7. Attach cooling module control unit
8. Attach wiring harness plug for cooling module control unit
- Attach and lock
9. Attach front panelling
- Attach ambient temperature sensor
- 4 bolts, 5 clips
10. Lower lifting platform
- Half way up
11. Connect battery
12. Program volatile memories
13. Close bonnet