Home ReviewsRefund
Home/Nissan/Altima/Nissan Altima L33 (2012-2015)/Repair manual/Collision/avoidance/Driver Assistance System (Mod) (Sedan): Wiring
Contents Wiring diagrams Section: Collision/avoidance All sections

Driver Assistance System (Mod) (Sedan): Wiring Nissan Altima L33

Collision/avoidance 2 illustrations

Precautions For Harness Repair

ITS communication uses a twisted pair line. Be careful when repairing it.

Scheme 118

Scheme 118: Precautions For Harness Repair
Scheme 118: Precautions For Harness Repair

Scheme 119

Scheme 119
Scheme 119
  1. Solder the repaired area and wrap tape around the soldered area. NOTE: A fray of twisted lines must be within 110 mm (4.33 in).
  2. Bypass connection is never allowed at the repaired area. NOTE: Bypass connection may cause ITS communication error. The spliced wire becomes separated and the characteristics of twisted line are lost.

More articles — Driver Assistance System (Mod) (Sedan)