Home ReviewsRefund
Home/Nissan/Altima/Nissan Altima L33 (2012-2015)/Repair manual/Collision/avoidance/Driver Assistance System (Its Control Unit) (Sedan): Remova…
Contents Wiring diagrams Section: Collision/avoidance All sections

Driver Assistance System (Its Control Unit) (Sedan): Removal & Installation Nissan Altima L33

Collision/avoidance 3 illustrations ~147 words

INSTALLATION

Installation is in the reverse order of removal.

Scheme 18

Scheme 18: Removal
Scheme 18: Removal
  1. Remove the trunk lid finisher. Refer to " «TRUNK LID FINISHER: REMOVAL AND INSTALLATION»(ref-576023-S21984453652013090900000) ".
  2. Disconnect the harness connector from the rear view camera washer control unit.
  3. Remove the rear view camera washer control unit nuts (A).
  4. Remove the rear view camera washer control unit (1).

Installation is in the reverse order of removal.

Scheme 19

Scheme 19: Exploded View
Scheme 19: Exploded View

Scheme 20

Scheme 20: Removal
Scheme 20: Removal
  1. Remove the trunk lid finisher. Refer to " «TRUNK LID FINISHER: REMOVAL AND INSTALLATION»(ref-576023-S21984453652013090900000) ".
  2. Disconnect the air tube from the rear view camera air pump motor.
  3. Disconnect the harness connector from the rear view camera air pump motor.
  4. Remove the rear view camera air pump motor bracket nuts (A).
  5. Remove the rear view camera air pump motor assembly (1).

Installation is in the reverse order of removal.

More articles — Driver Assistance System (Its Control Unit) (Sedan)