Home ReviewsRefund
Home/Nissan/Altima/Nissan Altima L33 (2012-2015)/Repair manual/Collision/avoidance/Driver Assistance System (Mod) (Sedan): Removal & Installat…
Contents Wiring diagrams Section: Collision/avoidance All sections

Driver Assistance System (Mod) (Sedan): Removal & Installation Nissan Altima L33

Collision/avoidance 2 illustrations

Installation

Installation is in the reverse order of removal.

Scheme 116

Scheme 116: Exploded View
Scheme 116: Exploded View

Scheme 117

Scheme 117: Removal
Scheme 117: Removal
  1. Remove the trunk lid finisher. Refer to " «TRUNK LID FINISHER: REMOVAL AND INSTALLATION»(ref-576023-S21984453652013090900000) ".
  2. Disconnect the air tube from the rear view camera air pump motor.
  3. Disconnect the harness connector from the rear view camera air pump motor.
  4. Remove the rear view camera air pump motor bracket nuts (A).
  5. Remove the rear view camera air pump motor assembly (1).

Installation is in the reverse order of removal.

More articles — Driver Assistance System (Mod) (Sedan)