System functions
With the Condition Based Service the execution of 8 maintenance operations is included in the scope
- Engine oil
- Front brake pads
- Rear brake pads
- Vehicle check
- Brake fluid
- Statutory vehicle inspection
- Pre-delivery check
- Diesel additive
For reasons of clarity, maintenance operations and their intervals will be given first (valid for EURO vehicles).
In certain countries, different values may be applicable e.g. for engine oil.
| Scope | Interval | Starting value/interval forecast | Time reference | |
|---|---|---|---|---|
| (calculated by) | Distance [km] | Time [months] | ||
| Engine oil (DME/DDE) | Flexible | DME: 30,000 DDE: 20,000 | 24 24 | On-board date |
| Front brake pads (DSC) | Flexible | 50,000 | ||
| Rear brake pads (DSC) | Flexible | 50,000 | ||
| Diesel additive (DDE) | Flexible | 200,000 | ||
| Vehicle check (instrument cluster) | Fixed | DME: 60,000 DDE: 60,000 | 48 48 | On-board date |
| Brake fluid (instrument cluster) | Fixed | 24 | On-board date | |
| Statutory vehicle inspection (instrument cluster) | Country-specific | Encodable | On-board date | |
| Pre-delivery check (instrument cluster) | Fixed | 1 | On-board date | |
MAINTENANCE OPERATIONS
| IMPORTANT | The reference time for time-dependent maintenance operations is the on-board date. The on-board date is used for the display of escalation (green symbol, yellow symbol, red symbol). In addition, the on-board date is the basis for sorting the maintenance requirements in the display. The on-board date stands still when the battery is flat or disconnected and must subsequently be corrected in the vehicle. The on-board date must be set correctly when resetting maintenance requirements. Resetting is described in the general service information. |
Other maintenance operations
- Passenger compartment microfilter: Link to every oil service. Diesel - every 2nd oil service.
- Spark plugs: Link to every 2nd oil service.
- Air cleaner: Link to every 2nd oil service. Diesel - every 3rd oil service.
- Exhaust emissions test: Deleted (may also be manually controlled using the DIS tester).
- Diesel fuel filter: Drain with every oil change, replace with every 3rd oil change.
- Diesel particulate filter: With every 9th oil change.
- Toothed belt (diesel): 240,000 km
- Poly-V belt (diesel): 240,000 km
Key Service Data
The concealed function for updating the key data is triggered as follows
- Insert remote control in the insert compartment
- Keep the centre-lock button pressed
- Change the terminal by pressing the START-STOP button
- Wait approximately 10 seconds (centre-lock button can be released)
- When the key data is updated a gong will sound