Diagnosis and Testing
- Verify the customer concern.
- Visually inspect for obvious signs of mechanical or electrical damage.
| Mechanical | Electrical |
|---|---|
| Refrigerant Heater control flaps Ducting | F use(s) Harness Electrical connectors Switch(es) |
VISUAL INSPECTION CHART
- If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
- If the cause is not visually evident, verify the symptom and refer to the Jaguar Approved Diagnostic System.
Scheme 107
Scheme 108
- Disconnect the air discharge temperature sensor electrical connector.
- Remove the air discharge temperature sensor.