Home/Ford/Probe/Ford Probe II (1992-1997)/Repair manual/Automatic Trans/Removal & Installation - A/t: Specifications
Contents Wiring diagrams Section: Automatic Trans All sections

Removal & Installation - A/t: Specifications Ford Probe II

TORQUE SPECIFICATIONS (PROBE)

ApplicationFt. Lbs. (N.m)
Lower Control Arm Ball Joint Bolt & Nut32-44 (43-59)
Torque Converter-To-Flexplate Nut32-45 (43-61)
Transaxle-To-Engine Bolt (1)
"A"66-86 (90-116)
"B"28-38 (38-51)
"C"14-18 (19-25)
Wheel Lug Nut65-87 (88-118)
INCH Lbs. (N.m)
Manual Lever Position Sensor Bolt84 (10)
Oil Filler Tube Bolt72 (8)
Oil Pan Bolt72-97 (8-11)
(1) (Схема №1)
(1)(Схема №1)

TORQUE SPECIFICATIONS (PROBE)

TORQUE SPECIFICATIONS (ESCORT, TRACER & PROBE)

ApplicationFt. Lbs. (N.m)
Escort & Tracer
Lower Crossmember-To-Chassis Nut47-66 (64-89)
Lower Crossmember-To-Transaxle Nut27-38 (37-52)
Oil Pan Bolt(1)
Tie Rod-To-Knuckle31-42 (42-57)
Torque Converter-To-Flexplate Nut25-36 (34-49)
Transaxle-To-Engine Bolt41-59 (55-80)
Upper Transaxle Mount Nut49-69 (66-94)
Wheel Lug Nut65-87 (88-118)
Probe
Left Mount Through-Bolt63-86 (86-116)
Left Mount-To-Bracket Bolt & Nut50-68 (67-93)
Lower Control Arm Ball Joint Bolt & Nut32-44 (43-59)
Lower Transaxle Mount Bolt50-68 (67-93)
Oil Pan Bolt(1)
Rear Transaxle Mount Bolt50-68 (67-93)
Torque Converter-To-Flexplate Nut32-45 (43-61)
Transaxle Lower Mount Bolt50-68 (67-93)
Transaxle-To-Engine Bolt50-73 (67-99)
Wheel Lug Nut65-87 (88-118)
(1) Tighten to 72-97 INCH lbs. (8-11 N.m).
(1)Tighten to 72-97 INCH lbs. (8-11 N.m).

TORQUE SPECIFICATIONS (ESCORT, TRACER & PROBE)