Normal Operation and Fault Conditions
See PARKING AID SYSTEM .
REFER to: PARKING AID - SYSTEM OPERATION AND COMPONENT DESCRIPTION (413-13 Parking Aid, Description and Operation).
If a MyKey® restricted key is in use, the parking aid menu is not available in the message center and cannot be deactivated.
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1B58:11 | Rear Sensors Power Circuit: Circuit Short To Ground | A continuous and on-demand DTC that sets when the rear sensor voltage supply circuit is shorted to ground or to the signal return circuit. |
DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B13B5:14 | Rear Center Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the center rear parking aid sensor circuits are open or the sensor signal line is shorted to ground. |
| B1B44:14 | Right Rear Outer Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the right rear outer parking aid sensor circuits are open or the sensor signal line is shorted to ground. |
| B1B48:14 | Left Rear Outer Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the left rear outer parking aid sensor circuits are open or the sensor signal line is shorted to ground. |
DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B13B5:12 | Rear Center Sensor: Circuit Short To Battery | A continuous and on-demand DTC that sets when the center rear parking aid sensor signal circuit is shorted to battery voltage. |
| B1B44:12 | Right Rear Outer Sensor: Circuit Short To Battery | A continuous and on-demand DTC that sets when the right rear outer parking aid sensor signal circuit is shorted to battery voltage. |
| B1B48:12 | Left Rear Outer Sensor: Circuit Short To Battery | A continuous and on-demand DTC that sets when the left rear outer parking aid sensor signal circuit is shorted to battery voltage. |
DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B13B5:96 | Rear Center Sensor: Component Internal Failure | A continuous and on-demand DTC that sets when the rear center parking aid sensor has internally failed or has an incorrect attenuation time. |
| B1B44:96 | Right Rear Outer Sensor: Component Internal Failure | A continuous and on-demand DTC that sets when the right rear outer parking aid sensor has internally failed or has an incorrect attenuation time. |
| B1B48:96 | Left Rear Outer Sensor: Component Internal Failure | A continuous and on-demand DTC that sets when the left rear outer parking aid sensor has internally failed or has an incorrect attenuation time. |
DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0100:87 | Lost Communication With ECM/PCM "A": Missing Message | A continuous and on-demand DTC that sets when the Parking Aid Module (PAM) is unable to communicate with the PCM . |
DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0121:87 | Lost Communication With Anti-Lock Brake System (ABS) Control Module: Missing Message | A continuous and on-demand DTC that sets when the Parking Aid Module (PAM) is unable to communicate with the ABS module. |
DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0140:87 | Lost Communication With Body Control Module: Missing Message | A continuous and on-demand DTC that sets when the Parking Aid Module (PAM) is unable to communicate with the BCM. |
DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U3003:62 | Battery Voltage: Signal Compare Failure | This DTC sets when the vehicle voltage message sent from the BCM varies by more than 2 volts from the actual voltage measured by the Parking Aid Module (PAM). |
DTC FAULT TRIGGER CONDITIONS
See IMAGE DISPLAY .
REFER to: PARKING AID - SYSTEM OPERATION AND COMPONENT DESCRIPTION (413-13 Parking Aid, Description and Operation).
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B115E:08 | Camera Module: Bus Signal/Message Failure | An on-demand DTC that sets in the Image Processing Module - B (IPM-B) when there is a LIN communication fault from the video camera. |
DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| C1001:01 | Vision System Camera: General Electrical Failure | A continuous DTC that sets in the APIM when no video signal is detected from the video camera when the vehicle is in REVERSE. |
APIM DTC FAULT TRIGGER CONDITIONS
See IMAGE DISPLAY .
REFER to: PARKING AID - SYSTEM OPERATION AND COMPONENT DESCRIPTION (413-13 Parking Aid, Description and Operation).
See IMAGE DISPLAY .
REFER to: PARKING AID - SYSTEM OPERATION AND COMPONENT DESCRIPTION (413-13 Parking Aid, Description and Operation).
See FIXED GUIDELINES and ACTIVE GUIDELINES .
REFER to: PARKING AID - SYSTEM OPERATION AND COMPONENT DESCRIPTION (413-13 Parking Aid, Description and Operation).
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0155:87 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: Missing Message | A continuous and on-demand DTC that sets when the Image Processing Module - B (IPM-B) is unable to communicate with the IPC . |
DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U3006:16 | Control Module Input Power "A": Circuit Voltage Below Threshold | Set by the Image Processing Module - B (IPM-B) when the supply voltage falls below 8 volts. |
DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U3003:17 | Control Module Input Power "A": Circuit Voltage Above Threshold | Set by the Image Processing Module - B (IPM-B) when the supply voltage is more than 16 volts. |
DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0140:87 | Lost Communication With Body Control Module: Missing Message | A continuous and on-demand DTC that sets when the Image Processing Module - B (IPM-B) is unable to communicate with the BCM. |
DTC FAULT TRIGGER CONDITIONS