Normal Operation and Fault Conditions
Refer to: PARKING AID - SYSTEM OPERATION AND COMPONENT DESCRIPTION .
Note. If a MyKey® restricted key is in use, the parking aid menu is not available in the message center and cannot be deactivated.
The Parking Aid Module (PAM) supplies voltage to the front parking aid sensors and active park assist sensors via a common circuit.
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1B57:11 | Front Sensors Power Circuit: Circuit Short To Ground | A continuous and on-demand DTC that sets when the front sensor voltage supply circuit is shorted to ground or to the signal return circuit. |
DTC FAULT TRIGGER CONDITIONS
The Parking Aid Module (PAM) supplies voltage to the rear parking aid sensors via a common circuit.
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1B58:11 | Rear Sensors Power Circuit: Circuit Short To Ground | A continuous and on-demand DTC that sets when the rear sensor voltage supply circuit is shorted to ground or to the signal return circuit. |
DTC FAULT TRIGGER CONDITIONS
Refer to: Parking Aid - System Operation and Component Description .
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B13B5:14 | Rear Center Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the center rear parking aid sensor circuits are open or the sensor signal line is shorted to ground. |
| B1B44:14 | Right Rear Outer Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the right rear outer parking aid sensor circuits are open or the sensor signal line is shorted to ground. |
| B1B48:14 | Left Rear Outer Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the left rear outer parking aid sensor circuits are open or the sensor signal line is shorted to ground. |
DTC FAULT TRIGGER CONDITIONS
Refer to: Parking Aid - System Operation and Component Description .
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B13B5:12 | Rear Center Sensor: Circuit Short To Battery | A continuous and on-demand DTC that sets when the center rear parking aid sensor signal circuit is shorted to battery voltage. |
| B1B44:12 | Right Rear Outer Sensor: Circuit Short To Battery | A continuous and on-demand DTC that sets when the right rear outer parking aid sensor signal circuit is shorted to battery voltage. |
| B1B48:12 | Left Rear Outer Sensor: Circuit Short To Battery | A continuous and on-demand DTC that sets when the left rear outer parking aid sensor signal circuit is shorted to battery voltage. |
DTC FAULT TRIGGER CONDITIONS
Refer to: Parking Aid - System Operation and Component Description .
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B13B5:96 | Rear Center Sensor: Component Internal Failure | A continuous and on-demand DTC that sets when the rear center parking aid sensor has internally failed or has an incorrect attenuation time. |
| B1B44:96 | Right Rear Outer Sensor: Component Internal Failure | A continuous and on-demand DTC that sets when the right rear outer parking aid sensor has internally failed or has an incorrect attenuation time. |
| B1B48:96 | Left Rear Outer Sensor: Component Internal Failure | A continuous and on-demand DTC that sets when the left rear outer parking aid sensor has internally failed or has an incorrect attenuation time. |
DTC FAULT TRIGGER CONDITIONS
Refer to: Parking Aid - System Operation and Component Description .
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1B36:12 | Right Front Outer Sensor: Circuit Short To Battery | A continuous and on-demand DTC that sets when the right front outer parking aid sensor signal circuit is shorted to battery voltage. |
| B1B38:12 | Right Front Inner Sensor: Circuit Short To Battery | A continuous and on-demand DTC that sets when the right front inner parking aid sensor signal circuit is shorted to battery voltage. |
| B1B40:12 | Left Front Outer Sensor: Circuit Short To Battery | A continuous and on-demand DTC that sets when the left front outer parking aid sensor signal circuit is shorted to battery voltage. |
| B1B42:12 | Left Front Inner Sensor: Circuit Short To Battery | A continuous and on-demand DTC that sets when the left front inner parking aid sensor signal circuit is shorted to battery voltage. |
DTC FAULT TRIGGER CONDITIONS
Refer to: Parking Aid - System Operation and Component Description .
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1B36:14 | Right Front Outer Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the right front outer parking aid sensor circuits are open or the sensor signal line is shorted to ground. |
| B1B38:14 | Right Front Inner Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the right front inner parking aid sensor circuits are open or the sensor signal line is shorted to ground. |
| B1B40:14 | Left Front Outer Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the left front outer parking aid sensor circuits are open or the sensor signal line is shorted to ground. |
| B1B42:14 | Left Front Inner Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the left front inner parking aid sensor circuits are open or the sensor signal line is shorted to ground. |
DTC FAULT TRIGGER CONDITIONS
Refer to: Parking Aid - System Operation and Component Description .
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1B36:96 | Right Front Outer Sensor: Component Internal Failure | A continuous and on-demand DTC that sets when the right front outer parking aid sensor has internally failed or has an incorrect attenuation time. |
| B1B38:96 | Right Front Inner Sensor: Component Internal Failure | A continuous and on-demand DTC that sets when the right front inner parking aid sensor has internally failed or has an incorrect attenuation time. |
| B1B40:96 | Left Front Outer Sensor: Component Internal Failure | A continuous and on-demand DTC that sets when the left front outer parking aid sensor has internally failed or has an incorrect attenuation time. |
| B1B42:96 | Left Front Inner Sensor: Component Internal Failure | A continuous and on-demand DTC that sets when the left front inner parking aid sensor has internally failed or has an incorrect attenuation time. |
DTC FAULT TRIGGER CONDITIONS
The Parking Aid Module (PAM) supplies voltage to the parking aid switch status LED when the parking aid system is disabled.
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1B54:11 | Function LED - Park Aid: Circuit Short To Ground | A continuous and on-demand DTC that sets when the parking aid switch status LED circuit is shorted to ground. |
| B1B54:12 | Function LED - Park Aid: Circuit Short To Battery | A continuous and on-demand DTC that sets when the parking aid switch status LED circuit is shorted to battery voltage or is open. |
DTC FAULT TRIGGER CONDITIONS
Refer to: Parking Aid - System Operation and Component Description .
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1C30:73 | Disable Switch - Park Aid: Actuator Stuck Closed | A continuous and on-demand DTC that sets when the parking aid switch is stuck closed or the signal circuit is shorted to ground. |
DTC FAULT TRIGGER CONDITIONS
The Parking Aid Module (PAM) communicates with the PCM through the High Speed Controller Area Network (HS-CAN).
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0100:87 | Lost Communication With ECM/PCM "A": Missing Message | A continuous and on-demand DTC that sets when the Parking Aid Module (PAM) is unable to communicate with the PCM. |
DTC FAULT TRIGGER CONDITIONS
The Parking Aid Module (PAM) communicates with the TCM through the High Speed Controller Area Network (HS-CAN).
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0101:87 | Lost Communication With TCM: Missing Message | A continuous and on-demand DTC that sets when the Parking Aid Module (PAM) is unable to communicate with the TCM for 0.5 seconds or more. |
DTC FAULT TRIGGER CONDITIONS
The Parking Aid Module (PAM) communicates with the ABS module through the High Speed Controller Area Network (HS-CAN).
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0121:87 | Lost Communication With Anti-Lock Brake System (ABS) Control Module: Missing Message | A continuous and on-demand DTC that sets when the Parking Aid Module (PAM) is unable to communicate with the ABS module for 0.5 seconds or more. |
DTC FAULT TRIGGER CONDITIONS
The Parking Aid Module (PAM) communicates with the SASM through the High Speed Controller Area Network (HS-CAN).
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0126:87 | Lost Communication With Steering Angle Sensor Module: Missing Message | Sets if the Parking Aid Module (PAM) if is unable to communicate with the SASM for 0.5 seconds or more after the active park assist system has been activated. |
DTC FAULT TRIGGER CONDITIONS
The Parking Aid Module (PAM) communicates with the PSCM through the High Speed Controller Area Network (HS-CAN).
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0131:87 | Lost Communication With Power Steering Control Module: Missing Message | Sets if the Parking Aid Module (PAM) if is unable to communicate with the PSCM for 0.5 seconds or more after the active park assist system has been activated. |
DTC FAULT TRIGGER CONDITIONS
The Parking Aid Module (PAM) communicates with the BCM through the High Speed Controller Area Network (HS-CAN).
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0140:87 | Lost Communication With Body Control Module: Missing Message | A continuous and on-demand DTC that sets when the Parking Aid Module (PAM) is unable to communicate with the BCM for 0.5 seconds or more. |
DTC FAULT TRIGGER CONDITIONS
The Parking Aid Module (PAM) receives voltage from RJB fuse 30 (5A).
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U3003:62 | Battery Voltage: Signal Compare Failure | A continuous and on-demand DTC that sets in the BCM when battery voltage above 15.9 volts is detected. |
DTC FAULT TRIGGER CONDITIONS
See Image Display.
REFER to: PARKING AID - SYSTEM OPERATION AND COMPONENT DESCRIPTION .
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B115E:08 | Camera Module: Bus Signal/Message Failure | An on-demand DTC that sets in the Image Processing Module - B (IPM-B) when there is a LIN communication fault from the video camera. |
IMAGE PROCESSING MODULE - B (IPM-B) DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| C1001:01 | Vision System Camera: General Electrical Failure | A continuous DTC that sets in the APIM when no video signal is detected from the video camera when the vehicle is in REVERSE. |
APIM DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| C1001:01 | Vision System Camera: General Electrical Failure | A continuous and on-demand DTC that sets in the FCDIM when no video signal is detected from the video camera when the vehicle is in REVERSE. |
DTC FAULT TRIGGER CONDITIONS
See Image Display.
REFER to: Parking Aid - System Operation and Component Description .
See Image Display.
REFER to: Parking Aid - System Operation and Component Description .
See Fixed Guidelines and Active Guidelines.
REFER to: Parking Aid - System Operation and Component Description .
The Image Processing Module - B (IPM-B) communicates with the IPC through the Medium Speed Controller Area Network (MS-CAN).
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0155:87 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: Missing Message | A continuous and on-demand DTC that sets when the Image Processing Module - B (IPM-B) is unable to communicate with the IPC for 5 seconds or more. |
DTC FAULT TRIGGER CONDITIONS
The Image Processing Module - B (IPM-B) receives voltage from the RJB fuse 29 (5A).
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U3006:16 | Control Module Input Power "A": Circuit Voltage Below Threshold | Set by the Image Processing Module - B (IPM-B) when the supply voltage falls below 8 volts. |
DTC FAULT TRIGGER CONDITIONS
The Image Processing Module - B (IPM-B) receives voltage from the RJB fuse 29 (5A).
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U3006:17 | Control Module Input Power "A": Circuit Voltage Above Threshold | Set by the Image Processing Module - B (IPM-B) when the supply voltage is more than 16 volts. |
DTC FAULT TRIGGER CONDITIONS
The Image Processing Module - B (IPM-B) communicates with the BCM through the Medium Speed Controller Area Network (MS-CAN).
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0140:87 | Lost Communication With Body Control Module: Missing Message | A continuous and on-demand DTC that sets when the Image Processing Module - B (IPM-B) is unable to communicate with the BCM for 5 seconds or more. |
DTC FAULT TRIGGER CONDITIONS
The manual zoom feature is controlled by the video camera.