Engine - Svt: Component Locations Ford Focus I рестайлинг

Special Tool(s)

SPECIAL TOOL SPECIFICATIONS Oil Seal Remover 303-293 (21-143) Installer, Crankshaft Oil Seal 303-395 (21-171) Installer, Crankshaft Oil Seal 303-684 (21-243)

Scheme 910

Scheme 911

Scheme 912

1. Remove the timing belt. For additional information, refer to «TIMING BELT»(ref-234426-S01870671512006060900000) .
2. Detach the crankshaft timing belt. Pull off the crankshaft pulley hub. Remove the key and timing belt thrust washer.
3. Remove the crankshaft front oil seal.

Scheme 913

1. Slide the crankshaft front oil seal onto the special tool until it is approximately in the middle.
2. Slide the special tool onto the crankshaft until it makes contact.
3. Slide the crankshaft front oil seal along the special tool by hand onto the crankshaft until it touches the oil seal carrier.
4. Detach the special tool.
5. Pull in the crankshaft front oil seal using the special tool, until it is home.
6. Fit the crankshaft pulley hub. Slide on the timing belt thrust washer and key. Fit the crankshaft pulley hub.
7. Installing the timing belt. For additional information, refer to «TIMING BELT»(ref-234426-S01870671512006060900000) .

SPECIAL TOOL SPECIFICATIONS Valve Spring Compressor 303-361 (21155) Adapter for 21-155 303-361-02(2115502) Connector, Air Supply Cylinder 303-363 (21157) Extractor, Valve Stem Oil Seals 303-374(21160)

Scheme 914

Scheme 915

Scheme 916

Scheme 917

SPECIAL TOOL SPECIFICATIONS Compressor, Valve Spring 303-350 (T89P-6565-A) Remover, Oil Seal, Valve Stem 303-468 (T94P-6510-AH) Compressor, Valve Spring 303-472 (T94P-6565-AH) Installer, Oil Seal, Valve Stem 303-470 (T94P-6510-CH) Impact Slide Hammer 307-005 (T59L-100-B) Compressor, Valve Spring 303-300 (T87C-6565-A)

Scheme 918

Scheme 919

SPECIAL TOOL SPECIFICATIONS Valve Spring Compressor 303-361 (21-155) Adaptor for 21-155 303-361-02 (21-155-02) Remover, Valve Stem Seals 303-374 (21-160)

Scheme 920

Scheme 921

SPECIAL TOOL SPECIFICATIONS Installer, Camshaft Oil Seal 303-160 (T81P-6292-A)

Scheme 922

SPECIAL TOOL SPECIFICATIONS Plate, Camshaft Alignment 303-465 (T94P-6256-CH) Timing Peg, Crankshaft 303-574 (T97P-6000-A)

Scheme 923

Scheme 924

SPECIAL TOOL SPECIFICATIONS Installer Camshaft, Oil Seal 303-160 (T81P-6292-A) Remover/Installer, Hose Clamp 412-108 (T96P-18539-A)

Scheme 925

Scheme 926

SPECIAL TOOL SPECIFICATIONS Installer, Crankshaft Front Oil Seal 303-164 (T81P-6700-A)

SPECIAL TOOL SPECIFICATIONS Centering Tool, Clutch Disc 308-204 (16067) Locking Tool, Flywheel 303-254(21135) Puller, Oil Seal 303-291 (21141) Oil Seal Remover 303-293 (21143)

Scheme 927

Scheme 928

Scheme 929

Scheme 930

SPECIAL TOOL SPECIFICATIONS Compressor, Valve Spring 303-300 (T87C-6565-A) Compressor, Valve Spring 303-350 (T89P-6565-A) Remover, Valve Stem Oil Seal 303-468 (T94P-6510-AH) Installer, Valve Stem Oil Seal 303-470 (T94P-6510-CH) Slide Hammer 307-005 (T59L-100-B) Compressor, Valve Spring 303-472 (T94P-6565-AH)

Scheme 931

Scheme 932