MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| PAG Refrigerant Compressor Oil (R-134a Systems) YN-12-D | WSH-M1C231-B | |
| R-134a Refrigerant YN-19 (US); CYN-16-P or CYN-16-R (Canada) | WSH-M17B19-A |
MATERIAL SPECIFICATIONS
TIGHTENING TORQUE SPECIFICATIONS
| Description | Nm |
|---|---|
| Auxiliary airflow mode door actuator screws | 2 |
| Auxiliary climate control fresh air inlet duct nuts | 7 |
| Auxiliary climate control housing bolts | 7 |
| Auxiliary line dash panel bracket nut | 6 |
| Auxiliary line floor pan bracket nuts | 6 |
| Battery airflow duct screws | 2 |
| Battery zone valve screws | 2 |
| Battery zone valve tube-O fitting nuts | 17 |
| Front auxiliary evaporator inlet line front fitting nut | 8 |
| Front auxiliary evaporator outlet and inlet line bracket bolt | 6 |
| Front auxiliary evaporator outlet and inlet line mid-joint fitting nuts | 8 |
| Front auxiliary evaporator outlet line front fitting nut | 15 |
| Rear auxiliary evaporator inlet line tube-O fitting | 10 |
| Rear auxiliary evaporator outlet and inlet line front bracket bolt | 6 |
| Rear auxiliary evaporator outlet and inlet line rear bracket bolt | 6 |
| Rear auxiliary evaporator outlet and inlet line rear fitting nuts | 8 |
| Rear auxiliary evaporator outlet line tube-O fitting | 37 |
| Thermostatic Expansion Valve (TXV) stud | 11 |
| TXV-to-lower bracket nut | 11 |
| TXV-to-upper bracket bolts | 8 |
TIGHTENING TORQUE SPECIFICATIONS
See also:
• JACKING & LIFTING