Manual sections

Repair manual

Module Communications Network: Diagnosis Ford Escape I facelift 2

Step-by-step instructions on "Module Communications Network: Diagnosis" for Ford Escape I facelift 2 (2007–2012). Pick an article — removal, installation, adjustment and diagnostics with illustrations.

Inspection and Verification

DTC Charts

Communication Network DTC Chart

Symptom Chart

Pinpoint Test A: The PCM Does Not Respond To The Scan Tool

Pinpoint Test B: The ABS Module Does Not Respond To The Scan Tool

Pinpoint Test C: The 4X4 Control Module Does Not Respond To The Scan Tool

Pinpoint Test D: The Instrument Cluster (IC) Does Not Respond To The Scan Tool

PINPOINT TEST D: THE IC DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test E: The Restraints Control Module (RCM) Does Not Respond To The Scan Tool

PINPOINT TEST E: THE RCM DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test F: The Occupant Classification System Module (OCSM) Does Not Respond To The Scan Tool

PINPOINT TEST F: THE OCSM DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test G: The Power Steering Control Module (PSCM) Does Not Respond To The Scan Tool

PINPOINT TEST G: THE PSCM DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test H: The Transmission Control Module (TCM) Does Not Respond To The Scan Tool

PINPOINT TEST H: THE TCM DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test I: The Battery Control Module (BCM) Does Not Respond To The Scan Tool

PINPOINT TEST I: THE BCM DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test J: The Smart Junction Box (SJB) Does Not Respond To The Scan Tool

PINPOINT TEST J: THE SJB DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test K: The Audio Control Module (ACM) Does Not Respond To The Scan Tool

PINPOINT TEST K: THE ACM DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test L: The HVAC Module Does Not Respond To The Scan Tool

Pinpoint Test M: The Satellite Digital Audio Receiver System (SDARS) Module Does Not Respond To The Scan Tool

PINPOINT TEST M: THE SDARS MODULE DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test N: The Front Display Interface Module (FDIM) Does Not Respond To The Scan Tool

PINPOINT TEST N: THE FDIM DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test O: The Front Controls Interface Module (FCIM) Does Not Respond To The Scan Tool

PINPOINT TEST O: THE FCIM DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test P: The Accessory Protocol Interface Module (APIM) Does Not Respond To The Scan Tool

PINPOINT TEST P: THE APIM DOES NOT RESPOND TO THE SCAN TOOL

PINPOINT TEST Q: THE PAM DOES NOT RESPOND TO THE SCAN TOOL OR NO ISO 9141 NETWORK COMMUNICATION

PINPOINT TEST R: INTERMITTENT NO HS-CAN COMMUNICATION, COMMUNICATION CAN BE INTERMITTENTLY ESTABLISHED

Pinpoint Test S: No High Speed Controller Area Network (HS-CAN) Communication, All Modules Are Not Responding

PINPOINT TEST S: NO HS-CAN COMMUNICATION, ALL MODULES ARE NOT RESPONDING

PINPOINT TEST T: INTERMITTENT NO MS-CAN COMMUNICATION, COMMUNICATION CAN BE INTERMITTENTLY ESTABLISHED

Pinpoint Test U: No Medium Speed Controller Area Network (MS-CAN) Communication, All Modules Are Not Responding

PINPOINT TEST U: PINPOINT TEST U: NO MS-CAN COMMUNICATION, ALL MODULES ARE NOT RESPONDING

Pinpoint Test V: No Power To The Scan Tool