2.0L - Engine Assembly - Engine Code(s): Ceta & Ccta (Roadster): Adjustments Audi TT 8J facelift

SUBFRAME MOUNT, CHECKING ADJUSTMENT

Procedure

Scheme 867

Release the EVAP canister -B arrow-, remove it upward -A arrow- and lay it aside.

Note. Ignore items -1 and 2-.

Check dimensions on the right mount for engine and transmission

1. Both bolt heads -2- must be parallel to the edge of the engine mount support arm -3-.
2. A distance of -x- = 16 mm must be present between engine mount -1- and engine support -4-.

Note. Distance -x- = 16 mm, can also be checked with corresponding round stock.

Adjust the subframe if the distance measured is too small or too large. Refer to SUBFRAME MOUNT, ADJUSTING .