FASTENER TIGHTENING SPECIFICATIONS
| Components | Fastener Size | Nm |
|---|
| Engine Mount 1 | | 90 + 90° |
| Engine Support | | 40 |
| Heat Shield | | 10 |
| Retaining Plate | | 20 |
| Subframe | | 55 |
| Bolts and Nuts |
| M6 | 9 |
| M7 | 15 |
| M8 | 20 |
| M10 | 40 |
| M12 | 65 |
| Exceptions |
| Ground Pins to the Strut Tower | | 9 |
| 1 Replace |
Scheme 47
Scheme 47: ENGINE TO AUTOMATIC TRANSMISSION 0B6
| Item | Bolt | Nm |
|---|
| 1 | M10 x 50 1) | 65 |
| 2 ••• 6 | M12x100 2)3) | 30 + 90° |
| 7 | M12x175 2)3) | 30 + 90° |
| 8, 11 | M10x60 2)3) | 15 + 90° |
| 9 | M10x75 2)3) | 15 + 90° |
| 10 | M10x95 2)3) | 15 + 90° |
| A | Alignment sleeves for centering |
| 1) Bolt class 10.9, the steel bolt may be used again unlimited number of times. 2) Through VIN 8T-9A-007999: replace the aluminum bolts. 3) From VIN 8T-9A-008000: the aluminum bolts may be used twice ENGINE, INSTALLING . |
