Home ReviewsRefund
Home/Volvo/V70/Volvo V70 II (2000-2004)/Repair manual/Anti-Lock/traction Control/Brake Control Module (BCM) Diagnostic Trouble Code (DTC) Di…
Contents Wiring diagrams Section: Anti-Lock/traction Control All sections

Brake Control Module (BCM) Diagnostic Trouble Code (DTC) Diagnostics: Adjustments Volvo V70 II

Anti-Lock/traction Control

Calibration

  1. Ignition on. Calibrate the brake control module (BCM).
  1. Continue Refer to «Verification»(ref-406990-S08158586212011070100000)

Calibrating the sensor

  1. Ignition on
  2. Calibrate the brake system. NOTE: When calibrating, the car must be on a level surface. Do not touch the brake pedal. The accelerometer can only be calibrated on cars with All-wheel drive (AWD). CAUTION: For the XC90, the yaw rate sensor and tilt sensor must also be calibrated.
  1. Continue Refer to «Reading off the status of the diagnostic trouble code (DTC)»(ref-406990-S01124686362011070100000)

More articles — Brake Control Module (BCM) Diagnostic Trouble Code (DTC) Diagnostics