Installing the vibration damper
Install the vibration damper.
Tighten the center nut to 180 Nm .
Use counterhold 9995433 .
Remove the counterhold. Tighten the screws. Tighten to 25 Nm .
Angle-tighten 30° . Use bevel protractor 9512050 .
Install the vibration damper.
Tighten the center nut to 180 Nm .
Use counterhold 9995433 .
Remove the counterhold. Tighten the screws. Tighten to 25 Nm .
Angle-tighten 30° . Use bevel protractor 9512050 .