Engine - Cleaning, Inspection and Adjustment: Specifications Volvo V40 I рестайлинг

Tightening the timing gear pulley

See Tightening timing gear pulley.

Scheme 179

1. Press the belt to check that the indicator on the tensioner moves easily
2. Position the upper timing cover.

Scheme 180

1. Turn the crankshaft two turns. Check that the markings on the crankshaft and camshaft pulley correspond. NOTE: Check that the indicator on the belt tensioner is within the marked area.
2. Remove the upper timing cover.

Scheme 181

Screw the engine mounting onto the engine. Tighten to 67 Nm .

Install the engine mounting screw and nut in the bodywork bracket. Tighten by hand.

Timing gear pulley, tightening

See Tightening timing gear pulley.

See Tightening timing gear pulley.

See also:
• Safety regulations for handling fuel
• Note when disconnecting and connecting the battery lead
• Camshaft cover and cylinder head, removing
• Camshaft cover, installing
• Starter motor, Installing