Home ReviewsRefund
Home/Volvo/S80/Volvo S80 I (1998-2003)/Repair manual/Engine Control Systems/Engine Control Sensors - Removal and Installation: Removal …
Contents Wiring diagrams Section: Engine Control Systems All sections

Engine Control Sensors - Removal and Installation: Removal & Installation Volvo S80 I

Engine Control Systems 1 illustration

Installation of lambda probes

Install lambda probes using tool 9995543 . Tighten to 45 Nm. (33.2 ft lb)

Secure wiring.

Lower the car slightly.

Connect the connectors.

Secure wiring.

Install LH front wheel. Tighten to 110 Nm. (81 ft lb)

Lower the car.

Scheme 165

Scheme 165: Removing the charge air pressure sensor
Scheme 165: Removing the charge air pressure sensor
  1. Disconnect the sensor connectors
  2. Remove the sensor from the intake manifold.

More articles — Engine Control Sensors - Removal and Installation