Removing components from the sub-frame Volvo S60 I

Removing components from the sub-frame

Remove the screw for the cable duct. Unhook the cable duct from the sub-frame.

For vehicles with fuel powered parking heater: Remove 2 bolts for the heater.

Unhook the heater from the mounting. Leaving it hanging in its upper mounting. Detach the fuel line for the heater from the holders on the sub-frame.

Scheme 1638

Remove

1. the screws for the front cross member
2. the brake pipe from the holders
3. rear beam. Remove one bolt and loosen the other. Then turn the beam to one side to expose the exhaust pipe.

Remove

1. the screw for the front/rear engine pad
2. the screws for the torque rod.