Position Sensor - Replacing: Other Volvo S60 I

Position sensor, rear suspension (Four-C), replacing

Note. The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Scheme 116

Ignition off.

Raise the vehicle.

Scheme 117

Remove

1. the nut for the linkage
2. the position sensor. Press in the catch hook and angle the bracket downwards
3. the connector
4. the bracket from the position sensor
5. the 2 screws.

Install position sensor

Install

1. the position sensor on the bracket
2. the 2 screws
3. the connector
4. the linkage
5. the nut.

Align the bracket which the position sensor is on. Press into position.