Removal Of Steering Column Covers
- Remove the ignition key (1).
- Remove the three screws (2).
- Press in the snap-in fixings and remove the lower steering column cover (3).
- Turn up the upper steering column cover (4).
Removal Of Steering-Column Lock Module
- Disconnect connectors.
- Press in the snap-in attachment and remove the steering-column lock module.
Removal Of Wire For Key Lock (Automatic Transmission Only)
Applies to cars with automatic transmission
- Remove the wire for the key lock.
- Set the ignition key in position I.
- Press up the striker plate and pull out the wire.
Removal of steering-column lock
- Drill out the security screws, which hold the steering-column lock.
- Remove the steering-column lock.
Installation Of Steering-Column Lock
- Insert the ignition key in the new steering-column lock.
- Check that the key is in position I and that the lock lug on the steering-column lock is down.
- Install the new steering-column lock against the cap on the steering column.
- Install new security screws.
- Tighten the security screws until screw heads break off.
Installation Of Wire For Key Lock (Automatic Transmission Only)
Applies to cars with automatic transmission
- Put the gear lever into position P.
- Set the ignition key in position I.
- Press in the wire in the ignition lock and feel to ensure that it is firmly fastened.
- Remove the ignition key and check that the gear lever is blocked in position P.
Installation Of Steering-Column Lock Module
- Remove the ignition key.
Install
- connectors
- steering-column lock module
Installation of steering column covers
- Install the lower steering column cover. NOTE: Ensure that no wires become jammed.
- Install the screws for the lower steering column cover.
- Fold down the upper steering column cover and press tight its snap-in attachments into the lower steering column cover. NOTE: Ensure that the gaiters around the control levers are correctly positioned against the column covers.
Installation
Install in reverse order.