Fitting control system
Note. Make sure that the gear selector lever is in N.
Fit the control system lever to the gear selector lever.
Fit
- control system bolts
- a new gasket for the control system cover. Note that the bolts are of different lengths (dimensions in mm)
Tighten the bolts alternately until loosely tightened. Then tighten alternately to 10 Nm .
Scheme 395
Fit the cable harness. Plug in the solenoid connectors.
Fit the oil temperature sensor, securing it with the bolt. Note that the bolt length is in (mm). Tighten to 10 Nm .
Attach the cable harness to the holder. Check that the cable harness is correctly positioned.
Refit as described in Assembling the control system and Fitting the subframe and front suspension components .