Removal
Switch off ignition. Disconnect the battery negative lead
Removing Covers And Panels
Scheme 2
Grasp both the boot and the panel. Pull it straight out to the left so that the catches release.
Remover the cover in the center console locker.
Removing Screws And Switches
Scheme 3
Remove the screws.
Separate the two connectors on the bracket.
Removing the center console
Scheme 4
Shift the gear selector to position D.
Apply the parking brake.
Pull up the rear edge of the center console. Pull it backward out of the dashboard.
Lift out the center console.
Installation
Installing the center console
Scheme 5
Shift the gear selector to position D.
Ensure that the parking brake is applied.
Install the center console.
Ensure that both the holders on the inside of the center console engage in the side panels on the dashboard.
Install and tighten the screws.
Connect the connectors.
Installing the panel (the boot for the parking brake lever)
Press the panel into the center console.
Install the cover.