The following table provides quick links to all information in this section.
| Ignition System, General Information. Refer to IGNITION SYSTEM, GENERAL INFORMATION . | |
|---|---|
| Safety Precautions. Refer to SAFETY PRECAUTIONS . | |
| Spark Plugs, Test Data. Refer to SPARK PLUGS, TEST DATA . | |
| Camshaft Position Sensor G40, Checking. Refer to CAMSHAFT POSITION SENSOR G40, CHECKING . | |
| Camshaft Adjustment Valve 1 N205, Checking. Refer to CAMSHAFT ADJUSTMENT VALVE 1 N205, CHECKING . | |
| Knock Sensors G61 and G66, Checking. Refer to KNOCK SENSORS G61 AND G66, CHECKING . | |
| Ignition Coils with Power Output Stage, Checking. Refer to IGNITION COILS WITH POWER OUTPUT STAGE, CHECKING . |
IGNITION SYSTEM, GENERAL INFORMATION
For all Ignition/Glow plug system component locations. Refer to IGNITION COMPONENTS OVERVIEW .
For all Ignition/Glow plug system removal/installation procedures and torque specifications. Refer to IGNITION COIL WITH POWER OUTPUT STAGE .
Note. All manufacturers special tools as well as common tools may contain a manufacturer specific part number. These tools may be substituted with an equivalent aftermarket tool or are available for purchase through VW. Manufacturers special tools as well as common tools that contain a manufacturer specific part number may be referenced in the test procedure illustrations showing the tool use or installation. If the manufacturer specific tool is not being used, an equivalent aftermarket tool may be installed in the same manner as the manufacturers special tool. The manufacturers test box Test Box 105 Pin VAG1598/42 is available for purchase or rental.