FASTENER TIGHTENING SPECIFICATIONS
| Component | Fastener Size | Nm |
|---|
| Clamping Sleeve Nut | | 25 |
| Cross Member to Underbody Nut | | 25 |
| Front Exhaust Pipe with Catalytic Converter to Turbocharger Nut 1, 2 | | 40 |
| Oxygen Sensor (3) | | 55 |
| Suspended Mount Bolt | | 25 |
| (1) Always replace (2) Lubricate the studs on the exhaust manifold with hot bolt paste (3) Only use hot bolt paste to grease the threads; do not let the paste get onto the slits in the oxygen sensor body |
| (2) | Lubricate the studs on the exhaust manifold with hot bolt paste |
| (3) | Only use hot bolt paste to grease the threads; do not let the paste get onto the slits in the oxygen sensor body |
