Home/Toyota/Tacoma/Toyota Tacoma II рестайлинг (2011-2015)/Repair manual/Engine Control Systems/Engine Control System (2TR-FE) (Service Specifications): Ot…
Contents Section: Engine Control Systems All sections

Engine Control System (2TR-FE) (Service Specifications): Other Toyota Tacoma II рестайлинг

SERVICE DATA

Camshaft timing oil control valve assemblyResistance 1 (+B) - 2 (GND)Standard6.9 to 7.9 kohms at 20°C (68°F)
Throttle with motor body assemblyResistance1 (M-) - 2 (M+)0.3 to 100 ohms at 20°C (68°F)
3 (E2) - 5 (VC)2.0 to 4.0 kohms at 20°C (68°F)
Accelerator pedal rod assemblyResistance5 (EP1) - 4 (VCP1)1 Mohms or higher
2 (EP2) - 1 (VCP2)1 Mohms or higher
Mass air flow meterResistance 4 (THA) - 5 (E2)Standard12.5 to 16.9 kohms at -20°C (-4°F)
2.19 to 2.67 kohms at 20°C (68°F)
0.50 to 0.68 kohms at 60°C (140°F)
Camshaft position sensorResistance1 (G+) - 2 (G-)835 to 1400 ohms at COLD
1 (G+) - 2 (G-)1060 to 1645 ohms at HOT)
Crankshaft position sensorResistance1 (NE+) - 2 (NE-)1630 to 2740 ohms at COLD
1 (NE+) - 2 (NE-)2065 to 3225 ohms at HOT
E.F.I. Engine coolant temperature sensorResistance1 (E2) - 2 (THW)2.32 to 2.59 kohms at 20°C (68°F)
1 (E2) - 2 (THW)0.310 to 0.326 kohms at 80°C (176°F)
Knock sensorResistance 1 (Ground) - 2 (Output)Standard120 to 280 kohms at 20°C (68°F)
E.F.I. RelayResistance (3 - 5)Standard10 kohms or higher
Below 1 ohms (Apply battery voltage to terminal 1 and 2)
Circuit opening relay assemblyResistance (3 - 5)Standard10 kohms or higher
Below 1 ohms (Apply battery voltage to terminal 1 and 2)