Home/Toyota/Tacoma/Toyota Tacoma II рестайлинг (2011-2015)/Repair manual/Engine Control Systems/Engine Control System (1GR-FE) (Service Specifications): Ot…
Contents Section: Engine Control Systems All sections

Engine Control System (1GR-FE) (Service Specifications): Other Toyota Tacoma II рестайлинг

SERVICE DATA

Camshaft timing oil control valve assemblyVVT system is OFF (OCV is OFF)Normal engine speed
VVT system is ON (OCV is ON)Rough idle or engine stalled
Throttle bodyStandard throttle valve opening percentage60 % or more
Accelerator pedal position sensorVoltage (Accel Sensor Out No. 1)Accelerator pedal released0.5 to 1.1 V
Accelerator pedal depress2.5 to 4.5 V
Voltage (Accel Sensor Out No. 2)Accelerator pedal released1.2 to 2.0 V
Accelerator pedal depress3.4 to 5.0 V
Camshaft timing oil control valve assemblyResistanceAt 20°C (68°F)6.9 to 7.9 ohms
Crankshaft position sensorResistanceAt 20°C (68°F)1850 to 2450 ohms
Mass air flow meter (using the Techstream)Ignition switch ON (IG)Less than 0.72 g/sec.
Engine coolant temperature sensorResistanceAt 20°C (68°F)2.32 to 2.59 kohms
At 80°C (176°F)0.310 to 0.326 kohms
Throttle With Motor bodyResistance1 (M-) - 2 (M+)0.3 to 100 ohms at 20 °C (68 °F)
Knock sensorResistanceAt 20°C (68°F)120 to 180 ohms
Circuit opening relayResistance (3 - 5)Standard10 kohms or higher
Below 1 ohms (Apply battery voltage to terminals 1 and 2)
EFI relaySpecified conditionStandard10 kohms or higher
Resistance (3 - 5)Below 1 ohms (Apply battery voltage to terminals 1 and 2)