| WARNING | If you do not select a suitable route and take proper precautions when performing a road test, an accident can occur. Select a level road with no traffic to minimize the risk of accident. Perform the test extremely carefully. Perform the road test using 2 persons, a driver and an assistant. |
Note. If DTC other than aimed DTC are previously detected in DTC confirmation procedure, be sure to troubleshoot DTC previously detected. Check that the following conditions are satisfied when using this procedure. Battery voltage > 10.5 V
- Drive vehicle more than 50 km/h (31 mile/h) for 40 sec.
- Stop vehicle and turn ignition switch to OFF position.
- Repeat Step 1 ) through 2 ) twice.
- Turn ignition switch to ON position.