Lan Communication System (Diagnostics) (Except Wrx): Specifications Subaru XV GP

ELECTRICAL SPECIFICATION

1. Body integrated unit

For I/O signals of the body integrated unit, refer to BODY CONTROL SYSTEM (DIAGNOSTICS). < Refer to CONTROL MODULE I/O SIGNAL. >

1. Engine control module

For I/O signals of ECM, refer to ENGINE (DIAGNOSTICS). < Refer to ENGINE CONTROL MODULE (ECM) I/O SIGNAL . >

1. Transmission control module

For I/O signals of TCM, refer to AUTOMATIC TRANSMISSION (DIAGNOSTICS). < Refer to TRANSMISSION CONTROL MODULE (TCM) I/O SIGNAL. >

1. VDC control module

For I/O signals of VDC CM, refer to VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS). < Refer to CONTROL MODULE I/O SIGNAL. >

1. Power steering CM

For unit I/O signals of power steering CM, refer to POWER ASSISTED SYSTEM (POWER STEERING) (DIAGNOSTICS). < Refer to CONTROL MODULE I/O SIGNAL. >

1. A/C control panel

For unit I/O signals of A/C control panel, refer to HVAC SYSTEM (DIAGNOSTICS). < Refer to AUTO A/C CONTROL MODULE I/O SIGNAL. >

1. Combination meter

For I/O signals of combination meter, refer to INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS). < Refer to CONTROL MODULE I/O SIGNAL. >

1. Airbag control module

For I/O signals of the airbag control module, refer to AIRBAG SYSTEM (DIAGNOSTICS). < Refer to AIRBAG CONTROL MODULE I/O SIGNAL. >

1. High grade MFD

For I/O signals of high grade MFD, refer to INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS). < Refer to CONTROL MODULE I/O SIGNAL. >

1. Auto headlight beam leveler CM

For I/O signals of auto headlight beam leveler CM, refer to INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS). < Refer to CONTROL MODULE I/O SIGNAL. >

1. Data link connector

For I/O signals of data link connector, refer to ENGINE (DIAGNOSTICS). < Refer to DATA LINK CONNECTOR . >

* CAN sleep state

Hold on for approx. one minute with ignition OFF and the doors, trunk, rear gate all closed.

See also:
• DIAGNOSTICS FOR ENGINE STARTING FAILURE