OPERATION
For detailed operation procedures, refer to the "PC application help for Subaru Select Monitor".
Read out DTCs stored in the airbag control module and the occupant detection control module. For operation procedures, refer to the "PC application help for Subaru Select Monitor".
Note. For details concerning DTCs, refer to the List of Diagnostic Trouble Code (Airbag system, Occupant detection system). < Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >
For operation procedures, refer to the "PC application help for Subaru Select Monitor".
Note. After repairing the occupant detection system, clear the DTCs stored in the airbag control module and the occupant detection control module.
Check the operating condition of each sensor, in the event of malfunction in the seat belt buckle switch or when the seat belt buckle switch has been replaced.
- On «Main Menu» display, select {Each System Check}.
- On «System Selection Menu» display, select {Airbag System}.
- On «Airbag System» display, select {Current Data Display & Save}.
The following table is for support data.
| Item | Display | Note |
|---|---|---|
| Trip Count | ||
| Count | ||
| Time Count | ||
| Belt Buckle Switch RH | Unbelted/Belted | "Belted" when passenger's seat belt is fastened "Unbelted" when passenger's seat belt is not fastened |
| Passenger Occupant Status | Occupied/Empty or CRS | "Occupied" when the occupant is present "Empty or CRS" when the seat is unoccupied or when child restraint seat is installed |
| Passenger Airbag Status | ON/OFF | "ON" when the passenger occupant status is "Occupied" "OFF" when the status is "Empty or CRS" |
Note. For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".