ELECTRICAL SPECIFICATION
| CAUTION | Never remove the occupant detection control module, occupant detection sensor or seat frame because they are integrated into one unit. |
Scheme 184
| Terminal No. | Terminal name | Input/Output value | Note |
|---|---|---|---|
| 1 | Airbag CM communication (FSR+) | Communication line | |
| 2 | Not used | ||
| 3 | Not used | ||
| 4 | Buckle switch- (BER-) | 0 V | Switch ground |
| 5 | Not used | ||
| 6 | IG power supply (IG) | 8 - 16 V | When ignition SW is ON |
| 7 | Not used | ||
| 8 | Buckle switch+ | 0 - IG voltage | Ignition voltage when the switch is ON |
| 9 | Airbag CM communication (FSR-) | 0V | GND |
| 10 | Not used |