Intake (Induction) (Sti Engine): Other Subaru Impreza GD/GC/GG рестайлинг 2

CAUTION

1. Wear work clothing, including a cap, protective goggles and protective shoes during operation.
2. Remove contamination including dirt and corrosion before removal, installation or disassembly.
3. Keep the disassembled parts in order and protect them from dust and dirt.
4. Before removal, installation or disassembly, be sure to clarify the failure. Avoid unnecessary removal, installation, disassembly and replacement.
5. Be careful not to burn your hands, because each part on the vehicle is hot after running.
6. Be sure to tighten fasteners including bolts and nuts to the specified torque.
7. Place shop jacks or rigid racks at the specified points.
8. Before disconnecting electrical connectors of sensor or units, be sure to disconnect the ground cable from battery.

Scheme 493

Scheme 494

1. Disconnect the ground cable from battery.
2. Disconnect the connector from mass air flow and intake air temperature sensor. (Scheme 493): Identifying Connector For Mass Air Flow And Intake Air Temperature Sensor
3. Loosen the clamp (A) which connects the air intake boot and intake duct.
4. Remove the clip (B) from air cleaner upper cover. (Scheme 494): Identifying Clip And Air Cleaner Upper Cover
5. Remove the air cleaner upper cover.
6. Remove the air cleaner element.