Home ReviewsRefund
Home/Saab/9-5/Saab 9-5 I рестайлинг 2 (2005-2010)/Repair manual/Automatic HVAC System/Automatic Climate Control: Wiring
Contents Section: Automatic HVAC System All sections

Automatic Climate Control: Wiring Saab 9-5 I рестайлинг 2

Automatic HVAC System 3 illustrations ~560 words

Check the wiring

Faults in the control module's female connector could be the cause of the diagnostic trouble code. Check the connector for oxidation, dislodged pins and pin clamping force.

Faults in the control module's female connector could be the cause of the diagnostic trouble code. Check the connector for oxidation, dislodged pins and pin clamping force.

Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits in the wiring harness. Monitor the multimeter, the diagnostic tool or test lamp during the check. In addition, check contacts, connectors and crimp connections for oxidation, dislodged pins and pin clamping force.

For more information see also

  1. The «READ VALUES CHART B»(ref-278647-S16283711132008013000001) for a description of read values.
  2. The «ACTIVATE MENU CHART B»(ref-278647-S20250570972008013000002) for a description of application areas.

Scheme 408

Scheme 408: DTC B1928: Seat Temperature Sensor Left Circuit Open/Short to B+; Short to Ground
Scheme 408: DTC B1928: Seat Temperature Sensor Left Circuit Open/Short to B+; Short to Ground

Faults in the control module's female connector could be the cause of the diagnostic trouble code. Check the connector for oxidation, dislodged pins and pin clamping force.

Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits in the wiring harness. Monitor the multimeter, the diagnostic tool or test lamp during the check. In addition, check contacts, connectors and crimp connections for oxidation, dislodged pins and pin clamping force.

For more information see also

  1. The «READ MENU CHART B»(ref-278647-S16283711132008013000001) for a description of read values.
  2. The «ACTIVATE MENU CHART B»(ref-278647-S20250570972008013000002) for a description of application areas.

Faults in the control module's female connector could be the cause of the diagnostic trouble code. Check the connector for oxidation, dislodged pins and pin clamping force.

Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits in the wiring harness. Monitor the multimeter, the diagnostic tool or test lamp during the check. In addition, check contacts, connectors and crimp connections for oxidation, dislodged pins and pin clamping force.

For more information see also

  1. The «READ MENU CHART B»(ref-278647-S16283711132008013000001) for a description of read values.
  2. The «ACTIVATE MENU CHART B»(ref-278647-S20250570972008013000002) for a description of application areas.

Scheme 409

Scheme 409: DTC B2173: Seat Temperature Sensor Right Circuit Short to Ground; Open/Short to B+
Scheme 409: DTC B2173: Seat Temperature Sensor Right Circuit Short to Ground; Open/Short to B+

Faults in the control module's female connector could be the cause of the diagnostic trouble code. Check the connector for oxidation, dislodged pins and pin clamping force.

Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits in the wiring harness. Monitor the multimeter, the diagnostic tool or test lamp during the check. In addition, check contacts, connectors and crimp connections for oxidation, dislodged pins and pin clamping force.

For more information see also

  1. The «READ MENU CHART B»(ref-278647-S16283711132008013000001) for a description of read values.
  2. The «ACTIVATE MENU CHART B»(ref-278647-S20250570972008013000002) for a description of application areas.

Scheme 410

Scheme 410
Scheme 410

Faults in the control module's female connector could be the cause of the diagnostic trouble code. Check the connector for oxidation, dislodged pins and pin clamping force.

Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits in the wiring harness. Monitor the multimeter, the diagnostic tool or test lamp during the check. In addition, check contacts, connectors and crimp connections for oxidation, dislodged pins and pin clamping force.

For more information see also

  1. The «READ MENU CHART B»(ref-278647-S16283711132008013000001) for a description of read values.
  2. The «ACTIVATE MENU CHART B»(ref-278647-S20250570972008013000002) for a description of application areas.

More articles — Automatic Climate Control