Repair manual
Saab 9-5 I рестайлинг 2 Repair Manual
Step-by-step repair and maintenance instructions for the Saab 9-5 I рестайлинг 2 (2005–2010): removal, installation, adjustment, diagnostics and parameter checks with illustrations.
102sections
1611articles
ENManual language
- Cars with a triggered seat-belt tensioner
- Cars with a triggered side airbag
- Cars with a triggered airbag
- USED PYROTECHNIC COMPONENTS
- SCRAPPING CARS WITH AIRBAGS AND SEAT-BELT TENSIONERS
- Scrapping belt tensioners
- Scrapping side airbags
- Scrapping driver airbags
- Scrapping passenger airbags
- SRS CONTROL MODULE
- To fit
- AIRBAG, DRIVER (333D)
- COIL SPRING (CONTACT ROLLER)
- SIDE IMPACT SENSOR, LH
- SIDE IMPACT SENSOR, RH
- SIDE AIRBAG
- Seat belts
- Inertia reel with belt tensioner activated
- Programming
- Fitting
- General safety rules
- Welding
- Painting
- Electrical work
- Body work
- Working on the steering gear
- Scrapping and recycling
- In connection with the accident-repair of cars
- Belt system
- Background
- Equipment
- Checking and activation
- Function
- Calculation algorithms
- Explanation
- Adaptive calculation algorithms
- Conditions for programming the algorithm, adults or children
- Conditions (Learn up)
- Control module, PPS (Passenger Presence System) (591)
- Force sensor, seatbelt, front passenger (643)
- Indicator lamp, Passenger Airbag ON/OFF (612a/b)
- AIRBAG CONTROL MODULE
- Conditions
- Backup power
- Grounding
- The side airbag's gas generator
- BUS MESSAGES, AIRBAG
- CONTROL MODULE, ACC (216)
- SRS/AIRBAG CONTROL MODULE (331)
- AIRBAG, PASSENGER (333P)
- Connected components
- A. Components always connected
- B. Additional components for LHD car
- C. Additional components for RHD car
- Measurement values
- Read values
- Control modules
- Outputs
- Inputs
- Fault criteria
- System reaction to a fault
- Input conditions
- System reactions to a fault
- ACC Unit
- To fit
- Temperature, separate for passengers and driver
- Air distribution
- Fan speed
- Air recirculation
- A/C
- P-bus and I-bus
- Engine stationary
- Engine running
- Ignition OFF
- Warm start
- Cold start
- Programming
- +30
- +15
- Power ground
- Sensor Ground
- Reference ground
- Petrol heater
- Diesel heater
- Bus Messages, ACC
- Manual control
- Automatic control
- Regeneration, automatic (applies to cars with engine alternative Z19)
- Heated front seat
- Electrically heated rear window with rear-view mirrors
- Fan current
- Connected components
- ACC unit, control module connections
- Control module
- Outputs
- Inputs
- Menu "Read Values" Chart A and B
- Menu "Activate" Chart A and B
- "Programming" menu
- Menu "System Information"
- Input conditions
- Fault criteria
- Fault handling
- Conditions
- Component list
- To fit
- Fitting
- Cleaning The Cooling Circuit
- Filling
- Differential
- To dismantle
- Checklist, Complete Before Changing Gearbox
- User recommendations
- Selector lever position P
- Selector lever position R
- Selector lever position N
- Selector lever position D
- Selector lever position 4 (diesel)
- Selector lever position 3 (diesel)
- Selector lever position M
- Selector lever position L
- Towing
- Function chain
- Gearbox
- Neutral Control
- Function
- Planetary gear
- Animation
- Active Components In Different Gear Positions
- Clutches
- Brakes
- Freewheel
- Solenoid valve S1
- Solenoid valve S2
- Solenoid valve S3
- Solenoid valve S4
- Solenoid valve S5
- Control Module Bus Outputs
- Battery voltage (+30 circuit)
- Battery voltage (+15 circuit)
- Control Module Ground
- Input Shaft Speed Sensor
- Output Shaft Speed Sensor
- Temperature program 1
- Temperature program 1 does not function when
- Is disengaged when
- Temperature program 2
- Temperature program 2 does not function when
- Bus Messages, TCM
- The TCM uses the following information
- The TCM sends the following information
- SPORT Shifting Programme
- Special Gearchange Programme
- Accelerator position
- Kickdown Function
- Solenoid Valves, S1-S5 For Gear Changing
- SLU Solenoid Valve For Lock-Up
- Trip
- Driving cycle
- Example of a trip
- Limp-home DTCs generated
- DTCs generated that do not activate Limp-home
- Example
- DICE Control Module (628)
- Connector H24-1
- Connected components
- General
- FA57 C01 97CV00101
- First group FA57
- Second group C 01
- Third group 01CV00101
- Overall ratio
- Speed at 1000 rpm
- B205E/B235E/B235R
- Type designation
- First code
- Second code
- Scope
- Points to remember
- Table connector A
- Table connector B
- Sensor, Output Speed
- Gearshift Solenoid Valve (S1, S2, S3, S4 And S5)
- Solenoid valve, Lock-up (SLU)
- Solenoid Valves, Pressure Regulation (SLT And SLS)
- Control module
- Outputs
- Inputs
- Menu "Read values"
- "Activate" menu
- "System information" menu
- Reprogramming TCM
- Conditions
- Fault criteria
- System reaction to a fault
- Action
- Checking the gearchange delay
- Background
- Check
- List of components
- Removing the power train — Part 1
- Removing the power train — Part 2
- Fitting in a worn cylinder
- Valve-Gear Timing
- Checking Valve Tightness
- New tensioner
- Main bearings
- Pitting in the surface sealing to the cylinder head
- Cylinder block
- Pistons
- Connecting rods
- Cylinder head
- Timing cover and end plate
- Second-order forces acting vertically
- Second-order forces acting laterally
- The Saab balancer shaft system
- Balancer shaft drive
- Camshaft and tappets
- Chain tensioner
- Oil sump
- Oil filter
- Drive belt routing, with and without A/C compressor
- Background
- General data
- Control values, pressure
- Piston types
- Classification of pistons and cylinder bores
- Piston classification
- Piston diameter
- Piston rings
- Gudgeon pin
- Colour coding of main bearing and big-end bearing shells
- Crankshaft journal diameter (1)
- Main journal diameter (2)
- Oil pressures
- Cylinder bore
- Valve guides
- Maximum lateral clearance between valve stem and valve guide
- Valve springs (double springs)
- Tappets
- Valve timing
- B235R
- B205E
- B235E
- B235L
- B205E BioPower
- B235E BioPower
- Fuel Consumption
- RECEPTION, P AND I-BUSSES (2 LEAD)
- Systems with communication cable to the data link connector
- Permanent BUS faults
- Intermittent BUS faults
- Incorrect values on the BUS
- BUS MESSAGES, TRIONIC T7
- BUS MESSAGES, TCM
- BUS MESSAGES, ESP
- BUS MESSAGES, SAS
- BUS MESSAGE, MAIN INSTRUMENT UNIT
- BUS MESSAGE, INFORMATION DISPLAY (SID)
- BUS MESSAGES, TWICE
- BUS MESSAGES, ACC
- BUS MESSAGES, AUDIO
- BUS MESSAGE, AUDIO NAVIGATION SYSTEM
- BUS MESSAGE, TELEPHONE (AUDIO)
- BUS SIGNALS, PSM
- BUS SIGNALS, PMM
- BUS MESSAGES, DICE
- BUS MESSAGES, AIRBAG
- BUS MESSAGES, PARKING ASSISTANCE (SPA)
- BUS MESSAGES, LIGHTING (DICE, TWICE, SID)
- Connected components
- Control module
- Outputs
- Inputs
- 1 No communication with the DICE
- 2 No communication with one or more control modules connected to a BUS
- 3 No communication with the SRS (Airbag) or ABS
- Changing car configuration
- Condition
- List of components
- To fit
- Charging the battery
- Actions after battery disconnection
- Battery
- Generator
- Charge warning lamp
- Internal circuitry
- Charging indicator lamp
- Handling
- Starter motor (4)
- Connector H24-1
- Connected components
- Battery, 70 Ah
- Battery, 60 Ah
- 84 71 195 Battery card
- Control module
- Outputs
- Inputs
- Points to bear in mind when handling the battery
- Circumstances
- Check
- To check
- Battery check
- List of components
- To fit
- Thermostat, 4-Cyl
- Coolant, 4-Cyl
- Expansion Tank, 4-Cyl
- Radiator Fan, 4-Cyl
- Coolant Pump, 4-cyl
- Checking
- Coolant Level Sensor
- Refitting
- Thermostat closed
- With the thermostat normally open (1)
- With the thermostat fully open (2)
- One radiator fan (cars without A/C)
- Two radiator fans (cars with A/C)
- Radiator fan does not run when ignition is turned from ON to OFF
- Motor, Radiator Fan, Left (37LH)
- Motor, RH Radiator Fan (37RH)
- Relay, High Speed, LH Fan (81)
- Relay, Low-Speed, 2 Radiator Fans (155)
- Temperature Sensor, Coolant (202)
- DICE Control Module (628)
- Connected components
- A. Connected components of LHD car
- B. Connected components of RHD car
- Coolant
- Temperature/Pressure Limits
- List of Lubricants
- Control module
- Outputs
- Inputs
- Tech 2 menu structure, DICE
- Conditions
- Final Check
- Radiator Fans, Petrol
- List of components
- General
- Exterior lighting
- Interior lighting system
- Lighting for buttons and controls
- Acoustic warning
- Windscreen and rear window wiping, intermittent
- High-pressure cleaning, headlamps
- Electrically heated rear window and door mirrors
- Radiator and battery fans
- Air conditioning
- P-BUS and I-BUS
- Power supply (+B circuit)
- Power supply (+15 circuit)
- Power supply (+30 circuit)
- Power supply (+54 circuit)
- Ground connection
- Connected components
- A. Connected components of LHD car
- B. Connected components of RHD car
- Scope
- Control module
- Outputs
- Inputs
- Menu "Read Values"
- Menu "Activate"
- Menu "Programming"
- Menu "System Information"
- Conditions
- List of components
- To fit — Part 1
- To fit — Part 2
- Tailgate 5D, Changing
- Speed-dependent locking of tailgate
- Automatic re-locking of tailgate
- Automatic locking of tailgate
- Bonnet
- Boot lid 4D
- Tailgate 5D
- P-bus and I-bus
- Central locking system
- Programming
- Programmed market specific central locking functions and permitted reprogramming
- Lock Button In Centre Console
- Lock Buttons On Doors
- Lock Motors, Rear Doors
- To lock
- Unlock
- TSL-locking
- TSL unlocking
- Unlocking tailgate with driver's door switch
- Connected components 4D
- Connected components 5D
- Connected components
- A. Components always connected
- B. Additional components for LHD car
- C. Additional components for RHD car
- Remote Control
- Control module
- Outputs
- Inputs
- Component list
- Engine Performance Diagnostic Routine Outline - General Information
- Engine Performance Safety Precautions
- Parasitic Load Explanation & Test Procedures - General Information 2
- Waveforms - Injector Pattern Tutorial - General Information 2
- Electrostatic Discharge Warning - General Information
- State Emission Standards - Diesel
- Emptying the fuel tank
- Fuel tank
- To fit
- Fuel filter (not US/CA or E85)
- Fuel pump
- Dismantling
- Fuel rail with injectors, 4-cyl. (B235E/R)
- Fuel rail with injectors, 4 cyl
- Fuel pressure regulator, 4 cyl
- Checking the fuel pressure regulator, 4-cyl
- Checking residual pressure, 4-cyl
- Fuel pump, US (incl. E85)
- Fuel filler pipe
- Fuel tank, US (Also E85) up to VIN 73521518
- General
- Octane rating
- Evaporation
- Fuel consumption
- Fuel effect
- Main fuse board 22a in the dashboard
- Level sensor, fuel (46)
- Motor, fuel pump (323)
- Unit, fuel pump (689)
- Connector H24-1
- Connector H24-2
- Connected components
- 4 cyl
- Summary of lubricants and sealants
- List of components
- To fit
- Preparations for first-time programming
- Programming for garage with fixed code
- Complete erase
- Identifying a garage door with rolling security code
- Gate programming and Canada programming
- Check procedure
- Background
- Procedure
- Protective equipment
- Windscreen and rear window
- Side windows
- Window lifts
- Door mirrors
- Door mirrors with memory (PMM)
- Interior rear-view mirror
- Voltage +54 circuit
- Ground
- P-bus and I-bus
- Electrically Heated Rear Window And Door Mirrors
- Electric heating uses the following information
- Remote control, garage opening
- Compass
- Zone use
- Compensating for the car's magnetic field
- Electrically Adjustable Door Mirrors
- Rear-view mirror setting
- Rear-view mirror, adjusting outwards
- Rear-View Mirrors With Automatic Antidazzle Function
- Battery voltage +30
- Battery voltage +15
- Bus Signals, PMM
- The PMM uses the following information
- PMM outputs the following information
- Switch
- Tilting the passenger door mirror
- Switch, Reversing Lights (31)
- Heating Element, Rear Window (115)
- Motor, Driver's Electrically Adjustable Door Mirror (126D)
- Motor, Passenger Electrically Adjustable Door Mirror (126P)
- Control Module, ACC (216)
- Motor, Door Mirror Retraction (551)
- Control Module, PMM (611)
- DICE Control Module (628)
- Electrochromatic Film, Door Mirror (639)
- Driver's Door Mirror (680D)
- Passenger Door Mirror (680P)
- A. Components always connected
- B. Additional components for LHD car
- C. Additional components for RHD car
- A. Connected components of LHD car
- B. Connected components of RHD car
- Connected components
- Door Mirror With Automatic Antidazzle Function
- Heating Element, Door Mirrors
- Garage Door Opening (GDO), US/CA
- Adhesive And Primer Used When Changing Window Glass
- 82 92 989 Adhesive Pistol, 110 V, AC 50 Hz
- Control module
- Outputs
- Inputs
- Menu "Read Values"
- Menu "Activate"
- Menu "System Information"
- Condition
- Probable cause
- Input requirements
- Component list
- List of components
- Replacing the Fresh Air Filter
- Leakage Detection, A/C System
- Conditions
- Check
- Functionality Check of The A/C System's Pressure Sensor
- Filling
- To fit
- Compressor Low and High-Pressure Pipe, Z19
- Compressor High-Pressure Pipe (4-cyl petrol)
- Compressor Low-Pressure Pipe (4-cyl petrol)
- Compressor Low-Pressure Pipe, Z19
- Evaporator High-Pressure Pipe, Z19
- Evaporator High-Pressure Pipe (4-cyl petrol)
- P-bus and I-bus
- A/C System
- Refrigerant
- Cooled glove box
- 1 Compressor
- 2 Condenser
- 3 Receiver
- 4 Expansion valve
- 5 Evaporator
- A/C request
- Engaging the A/C
- Radiator fans
- Compressor
- Pipes and hoses
- O-rings
- Compressor, A/C (170)
- Control module, ACC (216)
- DICE Control Module (628)
- Connector H24-1
- Connector H24-2
- Connected components
- R134a
- Compressor oil
- Control module
- Outputs
- Inputs
- Tech 2 menu structure, DICE
- No A/C
- Removing
- Fitting
- Air Conditioning A/C, Petrol Engine
- Component list
- To fit
- Bleeding the Brake System
- If leakage occurs in the primary circuit
- If leakage occurs in the secondary circuit
- Brake Caliper, Rear Wheel, Swinging Caliper
- Vacuum Pump
- High-Level Brake Light Bulb (30RC)
- Lamp, LH Brake Light (30RL)
- Lamp, RH Brake Light (30RR)
- Connection, Trailer Connector (258)
- Connected components 4D
- Connected components 5D
- A. Components always connected
- B. Additional components for LHD car
- C. Additional components for RHD car
- Connected components
- Master Cylinder
- Brake Servo Unit
- Vacuum Pump, Diesel Engine
- Conditions
- List of components
- General safety regulations
- Alternative 1
- Alternative 2
- Alternative 3
- Programming, parking lights
- Xenon headlamp, changing
- Refitting
- Xenon lamp, changing
- Headlamp/AHL control module, changing
- Headlamp/AHL control module, spare parts programming
- To fit
- Changing bulb in switch between steering wheel and driver's door
- Changing
- Checking lighting
- Exterior lighting
- Interior lighting
- Headlamps, halogen
- Headlamps, xenon
- Parking lights
- Brake lights
- Reversing lights
- Front fog lights
- Rear fog light
- Direction indicators
- Hazard warning lights
- Side marker lights
- Roof lamps and floor lighting
- Reading lights
- Vanity mirror lighting
- Glove box light
- Floor lighting
- Courtesy lights
- Luggage compartment illumination 4D
- Luggage compartment illumination 5D
- Lighting for buttons and controls
- BUS messages, lighting (DICE, TWICE, SID)
- DICE sends the following information, lighting
- TWICE sends the following information, lighting
- SID sends the following information, lighting
- Parking light filament monitor
- Brake light filament monitor
- Headlamp flasher, US/CA/JP
- Motor, Xenon lamp screen
- Xenon headlamps
- LH headlamp
- RH headlamp
- Ground connection
- Manual (position 1 or 2)
- Automatic (position 0)
- Reading and mirror lighting
- Luggage compartment lighting
- Light-and-key monitor
- Light monitor
- Key monitor
- Horn
- General
- Main beam lamp, LH (11FL)
- Main beam lamp, RH (11FR)
- Dipped beam lamp, LH (12FL)
- Dipped beam lamp, RH (12FR)
- Parking light bulb, front left (13FL)
- Parking light bulb, front right (13FR)
- Lamp, RL parking light (13RL)
- Lamp, RR parking light (13RR)
- Lamp, numberplate lighting (15)
- Lamp, RL direction indicator (27RL)
- Lamp, RR direction indicator (27RR)
- High-level brake light bulb (30RC)
- Lamp, LH brake light (30RL)
- Lamp, RH brake light (30RR)
- Switch, reversing lights (31)
- Lamp, LH reversing light (32HL)
- Lamp, RH reversing light (32HR)
- Lamp, LH rear fog light (33HL)
- Lamp, RH rear fog light (33HR)
- Lamp, center roof lighting (50C)
- Lamp, luggage compartment lighting (55)
- Switch, luggage compartment illumination (56)
- Central locking system motor, boot lid/tailgate (184H)
- Control module, ACC (216)
- Reading lamp, center (225C)
- Connection, trailer connector (258)
- Control module, PMM (611)
- DICE control module (628)
- Headlamp, LH (663FL)
- Headlamp, RH (663FR)
- Unit, dome light, center (685C)
- Unit, handle, boot lid (691)
- Connected components 4D
- Connected components 5D
- Connected components
- Front load angle sensors
- Rear load angle sensors
- Scope
- Remember
- Control module connection
- Control module
- Outputs
- Inputs
- Menu "Read Values"
- Menu "Activate"
- Menu "Programming"
- Menu "System Information"
- Condition
- Conditions
- Enable criteria
- Fault criteria
- System reaction to a fault
- Action
- Background
- Procedure
- Aligning on a wall
- List of components — Part 1
- List of components — Part 2
- Component list
- Programming speedometer
- Adjusting Speedometer Night Panel
- Adjusting the fuel gauge/sensor
- Alternative 1. Gauge reading error across the whole scale
- Alternative 2. Reading error at a certain level
- Adjusting the Fuel Gauge
- Refitting
- General
- Control module
- Cabin light sensor
- Speedometer
- Odometer/trip meter
- Tachometer
- Fuel gauge
- Coolant temperature gauge
- Turbo boost gauge
- Warning and indicator lamps
- Information display
- Indicators and warnings on the information display
- Instrument and display lighting
- Control module outputs, bus
- Battery voltage +15
- Odometer/tripmeter
- Fuel reserve indicator lamp
- Fuel consumption
- Coolant temperature
- BioPower
- Rheostat level
- Information display (MIU)
- Glow plug indicator lamp
- Example
- Hazard warning lights
- Selector lever position indicator, information display
- Connected components
- A. Connected components of LHD car
- B. Connected components of RHD car
- Control module connection
- Outputs
- Inputs
- Menu "Read Values"
- Menu "Activate"
- Menu "System information"
- Menu "Programming"
- Conditions
- Fault criteria
- To check
- List of components
- Procedure
- To fit
- Antenna, GPS/mobile telephone (4D)
- Antenna, GPS/mobile telephone (5D)
- Refitting
- Principal components
- General
- Antenna, mobile telephone/GPS
- SRS/Airbag control module
- Horn
- Hazard warning lights
- Main unit, audio system
- SID
- Amplifier
- Speakers
- Steering wheel controls
- Power supply +30
- Ground connection
- Activation
- Control functions
- Main fuse board 22a in the dashboard
- Main unit, audio system (353)
- Head unit, audio/navigation (635)
- 4D
- 5D
- Connected components
- Resistance value
- Control module
- Outputs
- Inputs
- Enabling criteria
- Fault criteria
- Conditions
- List of components
- Refitting
- Changing holder
- Bus Messages, Parking Assistance (SPA)
- SPA uses the following information
- SPA sends out the following information
- Turning off SPA
- Objects alongside the car
- Configuration
- +30
- +15
- Connected components 4D
- Connected components 5D
- Control module
- Outputs
- Inputs
- Menu "Read Values"
- Condition
- Procedure
- Conditions
- List of components
- Light bulbs
- Steering Wheel Switch
- Coolant Level Sensor
- Refitting
- Ambient temperature sensor
- Steering wheel controls
- Filament monitor
- Rheostat
- Interior light sensor
- Units and languages
- Acoustic warning
- Trip computer
- Time
- CHECK messages
- Petrol driven cars
- Cars with diesel engine
- Horn
- Night Panel
- Engine off time
- Parking and auxiliary heater
- Information display (MIU)
- Bus Messages, SID Control Module
- General
- Battery voltage +30
- Battery voltage +15
- Ground connection
- Buttons on the instrument panel
- Settings
- Functions of the SID control module with the ignition ON
- Select function
- Setting the values
- Calculations in SID 2
- Calculations
- Speed warning ME, SID 1 and 2
- Intermediate service
- Main service
- Main and intermediate service
- Activation of the service message
- A. Connected components of LHD car
- B. Connected components of RHD car
- Connected components
- Scope
- Control module connection
- Control module
- Outputs
- Inputs
- Menu "Read Values"
- Menu "Activate"
- Menu "Programming"
- Menu "System Information"
- Enable criteria
- Fault criteria
- Conditions
- Preconditions
- List of components
- Front Seat
- When fitting the seat
- To fit — Part 1
- To fit — Part 2
- Fitting
- Rear seat
- Heated rear seat
- Manual control
- Automatic control
- Button and controls lighting
- Bus communication
- Electrically adjustable door mirrors
- +30
- +15
- Grounding
- Storing
- Memory Retrieval
- Bus Signals, PSM
- PSM uses the following information
- PSM sends out the following information
- Control Module, ACC (216)
- Temperature Sensor, Heating Pad (254)
- Control Module, Electrically Adjustable Driver's Seat With Memory (357Dk)
- DICE Control Module (628)
- Connected components
- A. Components always connected
- B. Additional components for LHD car
- C. Additional components for RHD car
- Fan Motor (616/617)
- Control module
- Outputs
- Inputs
- Tech 2 menu structure, TWICE
- Conditions
- Input conditions
- Fault criteria
- Probable cause of fault
- Component list
- Spare Parts Programming, ESP
- ESP Control Module
- To fit
- ABS
- TCS
- Speed information for other systems
- Bus Messages, ESP
- Bus Messages, SAS
- EBD
- Main relay
- Pump relay
- Battery voltage (+30 circuit)
- Battery voltage (+15 circuit)
- Control module ground
- Brake Light Switch
- Brake Pressure Sensor
- Yaw rate sensor
- Lateral acceleration sensor
- Function
- Bus messages
- ABS Warning Lamp
- ABS Function
- Braking force/Wheel slip
- Lateral force/Wheel slip
- Phase 1
- Phase 2
- Phase 3
- Phase 1 to 3
- Electronic Brake-Force Distribution (EBD)
- Phase 1 Pressure holding
- Phase 2 Pressure reduction
- Phase 3 Pressure build-up
- Phase 1 Pressure build-up on both front wheels (filling pulse)
- Phase 2 Pressure increase in the circuit with wheelspin
- Phase 3 Pressure reduction in the circuit with wheelspin
- Phase 4 Release
- ESP Function
- Phase 2 Pressure increase on wheels under ESP regulation
- Phase 3 Pressure reduction on wheels under ESP regulation
- Driver applying the brakes, see phases 1-3
- Phase 4. Termination
- DICE Control Module (628)
- Head Unit, Audio/Navigation (635)
- Connected components
- A. Connected components of LHD car
- B. Connected components of RHD car
- Control Module
- Scope
- Points to remember
- Outputs
- Inputs
- Menu: "Read values"
- "Activate" menu
- Menu "System information"
- Conditions
- List of components
- Refitting
- Starter motor
- Ignition switch
- TWICE control module
- Gear selector, automatic
- Starting interlock contact, clutch pedal
- Starter motor (4)
- Main unit, audio system (353)
- Connector H24-1
- Connected components
- A. Components always connected
- B. Additional components for LHD car
- C. Additional components for RHD car
- Control module
- Outputs
- Inputs
- Conditions
- To check
- List of components
- To fit
- Antenna, GPS/mobile telephone (4D)
- Antenna, GPS/mobile telephone (5D)
- Programming the main unit
- General
- Provisions for mobile phone (TEL 0)
- Provisions for handsfree (TEL 1)
- Main unit
- Display
- Amplifier
- Speakers
- Steering wheel controls
- Power supply (+30 circuit)
- Ground connection
- Bus message, telephone (Audio)
- The main unit uses the following information
- The main unit transmits the following information
- Activation
- Control functions
- Telephone connection
- Function
- Main fuse board 22a in the dashboard
- Main unit, audio system (353)
- Head unit, audio/navigation (635)
- Connected components
- Scope
- Remember
- Control module
- Outputs
- Inputs
- Menu "Read Values"
- Menu "System Information"
- Conditions
- Probable cause of fault
- List of components
- To fit
- Refitting
- LED (Light Emitting Diode)
- Antenna unit, immobilization
- General
- Factory programming
- EOL programming
- Market programming
- Programming
- After market programming
- Spare parts programming
- Immobilization
- Anti-theft alarm
- Programming of transponders and remote controls
- Self-arming
- Anti-theft alarm programming
- Self-arming time
- Labels, decals
- Door switches
- Boot/luggage compartment switch
- Key switch boot/luggage compartment alarm disarming
- Bonnet switch
- Glass breakage sensor (4D)
- Glass breakage sensor (5D)
- Tilt sensor
- Siren
- Horn (certain markets from and including chassis No. 43013162)
- Direction indicators
- LED
- Remote control
- P-BUS and I-BUS
- BUS communication
- TWICE uses the following information for theft protection
- TWICE transmits the following information for theft protection
- Function
- Control buttons on the remote control
- Transport
- Battery warning (low voltage)
- Start check
- Battery back-up
- Disconnection
- Connection
- Operating voltage drop +30 for armed alarm
- Short-circuit protection for direction indicators
- Connected components 4D
- Connected components 5D
- Connected components
- A. Connected components of LHD car
- B. Connected components of RHD car
- Scope
- Remember
- Transponder for immobilizer
- Control module
- Outputs
- Inputs
- Menu "Read Values"
- Menu "Activate"
- Menu "Immobilization"
- Menu "Programming"
- Menu "System Information"
- Conditions
- Main condition
- Enable criteria
- Fault criteria
- Programming
- General
- Lamp check
- Seat belt warning
- Electrically heated rear seat
- Electric powered passenger seat
- Central locking system
- Immobilization
- Anti-theft alarm
- P-BUS and I-BUS
- Power supply +30
- Power supply +15
- Power supply +B
- Ground connection, power ground
- Ground connection, signal ground
- SWITCH, LUGGAGE COMPARTMENT ILLUMINATION (56)
- CENTRAL LOCKING SYSTEM MOTOR, BOOT LID/TAILGATE (184H)
- Connected components 4D
- Connected components 5D
- Connected components
- Scope
- Control module
- Outputs
- Inputs
- Menu "Read Values"
- Menu "Activate"
- Menu "Immobilizer"
- Menu "Programming"
- Menu System Information
- Condition
- Enable criteria
- Fault criteria
- List of components
- Programming
- Changing the clamps
- Rain sensor
- Windscreen wipers with rain sensor
- Windscreen wiper without rain sensor
- Rear window wiper
- High-pressure headlamp washing
- Functions in various conditions
- Automatic position
- Low speed (I)
- High speed (II)
- Intermittent (J)
- WASHER SYSTEM, REAR WINDOW (5D)
- Connected components
- A. Connected components of LHD car
- B. Connected components of RHD car
- WASHER PUMP, HEADLAMPS
- Scope
- Control module
- Outputs
- Inputs
- Conditions
- Check rain sensing wiper contact to windscreen
- List of components