ECU information available
Actuator test: no OK
Measure parameters: no OK
Checks to be carried out if fault is present
| conditions under which the fault appears | checks to be made conditions for checking |
|---|---|
| engine running | replace the control unit |
Home/Peugeot/Expert/Peugeot Expert I (1995-2006)/Repair manual/Power unit/Check: injection-ignition control unit function
Contents
Wiring diagrams Section: Power unit- Identification: belt tension
- Tightening torques: DW8B engine type (DW8B)
- Checking and adjusting values: engine types DW10TD - DW10UTD - DW10ATED4 (DW10TD)
- Identification: engine
- Data - identification engine (1580 SPI)
- Data - identification engine mountings (1580 SPI)
- Data - identification engine (XUD9)
- Identification: engine identification
- Identification engine (1580 SPI)
- Identification: engine — variant 2
- Identification: engines (XU7JP)
- Presentation: engine (DW8)
- Data: injector carrier seals
- Identification: engine — variant 3
- Identification, data, tightening torque(s): engine
- Modification: tightening torques (XU7JP)
- Tightening of clips: turbocharger inlet outlet pipe/inlet manifold
- Tightening torques XU engines 8 valves (XU7JP)
- Tightening torques: engine (1580 SPI)
- Configuration: engine ECU
- Configuration: engine management control unit
- Removing - refitting: power unit (1580 SPI)
- Removing - refitting: power unit (DW8)
- Refitting: engine (cylinder block)
- Dismantling: engine (DW8B)
- Refitting: engine (DW8B)
- Removing - refitting: power unit (DW10ATED4)
- Dismantling - stripping engine
- Dismantling - stripping engine (1580 SPI)
- Re-assembling: engine (1580 SPI)
- Fitting: engine on stand
- Dismantling - stripping: engine — variant 2
- Modification: CTG tension meters for the new DW engines
- Modification: CTG tension meters for the new DW engines — variant 2
- Removing - refitting: fuel high pressure regulator on fuel high pressure pump (DW10TD)
- Modification: engine (DW8)
- Bleeding: fuel supply system
- Refitting: engine (cylinder block) — variant 2
- Refitting: engine (timing gear) (XU7JP)
- Refitting: engine
- Refitting - re-assembling engine (cylinder block) (1580 SPI)
- Refitting: engine (cylinder head)
- Check end of compression pressures
- Check end of compression pressures — variant 2
- Refitting engine (timing gear) (1580 SPI)
- Refitting: engine (timing gear - high pressure fuel pump)
- Data: lubrication
- Check: oil tightness of the engines and gearboxes
- Suction draining: engine
- Suction draining: engine — variant 2
- Engine capacities
- Description and operation of the gas injection
- Operation of the expansion/relief valve
- Operation of the expansion/relief valve — variant 2
- Plate diffuser
- Plate diffuser — variant 2
- Operation of the ECU
- Operation of the ECU — variant 2
- Foreword
- Foreword — variant 2
- Foreword — variant 3
- ECU terminals
- ECU terminals — variant 2
- Update no. 9: Peugeot on-board fault recorder (TEP 92)
- Data - identification injectors (BOSCH equipment) (XUD9, 1.9 TD)
- Modification to passive safety: fuel supply
- Data - identification injection pump (1.9 TD, XUD9)
- Updating the Peugeot on-board fault recorder (TEP 92): CD ROM 96.2
- Update DIAG 2000: CD ROM 96.4
- Down-loading of the control unit (XU7JP, 1580 SPI)
- Setting of units: under bonnet
- Position of components: under bonnet
- Update DIAG 2000: CD ROM 97.4
- Update DIAG 2000: CD ROM 98.2
- Update DIAG 2000: CD ROM 98.3
- Engine
- Engine — variant 2
- Update DIAG 2000: CD ROM 98.5
- ECU terminals — variant 3
- ECU terminals — variant 4
- Updating the (TEP92) on-board tester by CD ROM 99.1
- Updating the (TEP92) on-board tester by CD ROM 99.1 — variant 2
- Latest update of the (TEP92) on-board fault recorder (TEP92) by CD ROM 99.5
- Latest update of the (TEP92) on-board fault recorder (TEP92) by CD ROM 99.5 — variant 2
- Data: injector fixing fork support pin
- Check: inlet air thermistor function
- Check: inlet air thermistor function — variant 2
- Check: fuel high pressure supply circuit (BOSCH assembly) (DW10TED, DW10TD, DW10ATED, DW10ATED4)
- Check: coolant thermistor function
- Check: coolant thermistor function — variant 2
- Check: idle regulation stepper motor function
- Check: idle regulation stepper motor function — variant 2
- Check: throttle potentiometer function
- Check: throttle potentiometer function — variant 2
- Check: vehicle speed sensor function
- Check: vehicle speed sensor function — variant 2
- Check: mixture regulation auto-adaptation function
- Check: mixture regulation auto-adaptation function — variant 2
- Check: engine speed sensor function
- Check: engine speed sensor function — variant 2
- Check: injector 1 - 4 control function
- Check: 1 - 4 injectors control function
- Check: injector 2 - 3 control function
- Check: 2 - 3 injectors control function
- Check: 1 - 4 ignition coil control
- Check: 1 - 4 ignition coil control — variant 2
- Check: 2 - 3 ignition coil control
- Check: 2 - 3 ignition coil control — variant 2
- Check: knock detection function
- Check: knock detection function — variant 2
- Check: knock module function
- Check: knock module function — variant 2
- Check: oxygen sensor function
- Check: oxygen sensor function — variant 2
- Check: mixture regulation function
- Check: mixture regulation function — variant 2
- Check: canister bleed solenoid valve control function
- Check: purge canister solenoid valve control function
- Check: battery voltage
- Check: battery voltage — variant 2
- Check: injection-ignition control unit function
- Check: injection-ignition control unit function — variant 2
- Check: function - down-loading of the control unit
- Check: function - down-loading of the control unit — variant 2
- Check: inlet air thermistor function — variant 3
- Check: inlet air thermistor function — variant 4
- Check: coolant thermistor function — variant 3
- Check: coolant thermistor function — variant 4
- Check: fuel pump relay control function
- Check: fuel pump relay control function — variant 2
- Check: throttle potentiometer function — variant 3
- Check: throttle potentiometer function — variant 4
- Check: vehicle speed sensor function — variant 3
- Check: vehicle speed sensor function — variant 4
- Check: stepper motor control function
- Check: stepper motor control function — variant 2
- Check: mixture regulation auto-adaptation function — variant 3
- Check: mixture regulation auto-adaptation function — variant 4
- Check: inlet manifold pressure sensor function
- Check: inlet manifold pressure sensor function — variant 2
- Check: canister bleed solenoid valve control function — variant 2
- Check: purge canister solenoid valve control function — variant 2
- Check: engine speed sensor function — variant 3
- Check: engine speed sensor function — variant 4
- Check: battery voltage function
- Check: battery voltage function — variant 2
- Check
- Check: no. 1 cylinder reference sensor function
- Check: injector 1 control function
- Check: 1 injectors control function
- Check: injector 2 control function
- Check: 2 injectors control function
- Check: injector 3 control function
- Check: 3 injectors control function
- Check: injector 4 control function
- Check: 4 injectors control function
- Check: the gearbox ECU manages the following functions
- Check: idle regulation function
- Check: knock detection function — variant 3
- Check: knock detection function — variant 4
- Check: upstream oxygen sensor function
- Check: upstream oxygen sensor function — variant 2
- Check: upstream oxygen sensor function (ageing)
- Check: upstream oxygen sensor function (ageing) — variant 2
- Check: downstream oxygen sensor function
- Check: downstream oxygen sensor function — variant 2
- Check: downstream oxygen sensor function (ageing)
- Check: downstream oxygen sensor function (ageing) — variant 2
- Check: injection-ignition control unit function — variant 3
- Check: injection-ignition control unit function — variant 4
- Check: power steering information function
- Check: power steering information function — variant 2
- Check: injection-ignition control unit function (ignition shunt)
- Check: injection-ignition control unit function (ignition shunt) — variant 2
- Check: 1 - 4 ignition coil control function
- Check: 1 - 4 ignition coil control function — variant 2
- Check: 2 - 3 ignition coil control function
- Check: 2 - 3 ignition coil control function — variant 2
- Checks: idling - emission control
- Checks: idling - emission control — variant 2
- Check: upstream oxygen sensor heating command function
- Check: upstream oxygen sensor heater control function
- Check: downstream oxygen sensor heater control function
- Check: downstream oxygen sensor heater control function — variant 2
- Check: air pump relay control function
- Check: air pump relay control function — variant 2
- Check: diagnostic warning light control function
- Check: diagnostic warning light control function — variant 2
- Check: knock stop function
- Check: knock stop function — variant 2
- Check: ECU configuration function
- Check: ECU configuration function — variant 2
- Check: catalytic converter function
- Check: catalytic converter function — variant 2
- Check: ignition misfire function (no. 1 cylinder - no. 2 cylinder - no. 3 cylinder - no. 4 cylinder)
- Check: ignition misfire function (no. 1 cylinder - no. 2 cylinder - no. 3 cylinder - no. 4 cylinder) — variant 2
- Check: exhaust air injection function
- Check: exhaust air injection function — variant 2
- Check: body accelerometer function
- Check: body accelerometer function — variant 2
- Check: ignition misfire function
- Check: ignition misfire function — variant 2
- Check: coolant thermistor function — variant 5
- Check: coolant thermistor function — variant 6
- Check: throttle potentiometer function — variant 5
- Check: throttle potentiometer function — variant 6
- Check: inlet air thermistor function — variant 5
- Check: inlet air thermistor function — variant 6
- Check: inlet manifold pressure sensor function — variant 3
- Check: inlet manifold pressure sensor function — variant 4
- Check: engine speed sensor function — variant 5
- Check: engine speed sensor function — variant 6
- Check: injector control function
- Check: injectors control function
- Check: knock detection function (XU engine)
- Check: knock detection function (engine XU)
- Check: oxygen sensor function — variant 3
- Check: oxygen sensor function — variant 4
- Check: battery voltage function — variant 3
- Check: battery voltage function — variant 4
- Check: torque reduction function
- Check: torque reduction function — variant 2
- Check: the gearbox ECU manages the following functions (XU engine)
- Check: idle regulation function (engine XU)
- Check: idle regulation solenoid valve function (TU engine)
- Check: idle regulation solenoid valve function (engine TU)
- Check: (XU engine)
- Check: knock regulation function (engine XU)
- Check: mixture regulation function — variant 3
- Check: mixture regulation function — variant 4
- Check: injection-ignition control unit function — variant 5
- Check: injection-ignition control unit function — variant 6
- Check: injection-ignition control unit function (knock sensor module) (XU engine)
- Check: injection-ignition control unit function (knock sensor module) (engine XU)
- Check: inlet air thermistor function — variant 7
- Check: inlet air thermistor function — variant 8
- Check: coolant thermistor function — variant 7
- Check: coolant thermistor function — variant 8
- Check: fuel pump relay control function — variant 3
- Check: fuel pump relay control function — variant 4
- Check: throttle potentiometer function — variant 7
- Check: throttle potentiometer function — variant 8
- Check: idle regulation stepper motor function — variant 3
- Check: idle regulation stepper motor function — variant 4
- Check: vehicle speed sensor function — variant 5
- Check: vehicle speed sensor function — variant 6
- Check: inlet manifold pressure sensor function — variant 5
- Check: inlet manifold pressure sensor function — variant 6
- Check: 2 - 3 ignition coil control function — variant 3
- Check: 2 - 3 ignition coil control function — variant 4
- Check: no. 1 injector control function
- Check: no. 1 injector control function — variant 2
- Check: no. 2 injector control function
- Check: no. 2 injector control function — variant 2
- Check: no. 3 injector control function
- Check: no. 3 injector control function — variant 2
- Check: no. 4 injector control function
- Check: no. 4 injector control function — variant 2
- Check: oxygen sensor function — variant 5
- Check: oxygen sensor function — variant 6
- Check: purge canister solenoid valve function
- Check: purge canister solenoid valve function — variant 2
- Check: engine speed sensor function — variant 7
- Check: engine speed sensor function — variant 8
- Check: knock detection function — variant 5
- Check: knock detection function — variant 6
- Check: 1 - 4 ignition coil control function — variant 3
- Check: 1 - 4 ignition coil control function — variant 4
- Check: function: position of EGR solenoid valve
- Check: function: position of EGR solenoid valve — variant 2
- Check: function: EGR solenoid valve control
- Check: function: EGR solenoid valve control — variant 2
- Check: sensor supply function
- Check: sensor supply function — variant 2
- Check: battery voltage — variant 3
- Check: battery voltage — variant 4
- Check: ignition injection control unit
- Check: ignition injection control unit — variant 2
- Check: electronic engine immobiliser dialogue
- Check: electronic engine immobiliser dialogue — variant 2
- Check: oxygen sensor heater control function
- Check: oxygen sensor heater control function — variant 2
- Check: mixture regulation function — variant 5
- Check: mixture regulation function — variant 6
- Check — variant 2
- Check: no. 1 cylinder reference sensor function — variant 2
- Check: immobiliser code storing
- Check: immobiliser code storing — variant 2
- Check: power steering stop information
- Check: power steering stop information — variant 2
- Check: cooling fan status
- Check: cooling fan status — variant 2
- Check: fan relay control function 1, fan relay control function 2
- Check: fan relay control function 1, fan relay control function 2 — variant 2
- Check: coolant thermistor function — variant 9
- Check: coolant thermistor function — variant 10
- Check: coolant thermistor function — variant 11
- Check: coolant thermistor function — variant 12
- Check: fuel pump relay control function — variant 5
- Check: fuel pump relay control function — variant 6
- Check: throttle potentiometer function — variant 9
- Check: throttle potentiometer function — variant 10
- Check: throttle potentiometer function — variant 11
- Check: throttle potentiometer function — variant 12
- Check: idle regulation stepper motor function — variant 5
- Check: idle regulation stepper motor function — variant 6
- Check: idle regulation stepper motor function — variant 7
- Check: idle regulation stepper motor function — variant 8
- Check: vehicle speed sensor function — variant 7
- Check: vehicle speed sensor function — variant 8
- Check: engine speed sensor function — variant 9
- Check: engine speed sensor function — variant 10
- Check: cylinder reference sensor function
- Check: cylinder reference sensor function — variant 2
- Check: mixture auto-adaptation function
- Check: mixture auto-adaptation function — variant 2
- Check: mixture auto-adaptation function — variant 3
- Check: mixture auto-adaptation function — variant 4
- Check: inlet manifold pressure sensor function — variant 7
- Check: inlet manifold pressure sensor function — variant 8
- Check: inlet manifold pressure sensor function — variant 9
- Check: inlet manifold pressure sensor function — variant 10
- Check: engine speed sensor function — variant 11
- Check: engine speed sensor function — variant 12
- Check: engine speed sensor function — variant 13
- Check: engine speed sensor function — variant 14
- Check: diagnostic warning light control function — variant 3
- Check: diagnostic warning light control function — variant 4
- Check: function: coolant temperature warning lamp (towards the built-in systems interface)
- Check: function: coolant temperature warning lamp (towards the built-in systems interface) — variant 2
- Check: function: engine coolant temperature information (towards the built-in systems interface)
- Check: function: engine coolant temperature information (towards the built-in systems interface) — variant 2
- Check: function: engine speed information (towards the built-in systems interface)
- Check: function: engine speed information (towards the built-in systems interface) — variant 2
- Check: function: air conditioning authorisation (towards the built-in systems interface)
- Check: function: air conditioning authorisation (towards the built-in systems interface) — variant 2
- Naming of components
- Check: inlet air thermistor function — variant 9
- Check: inlet air thermistor function — variant 10
- Check: coolant thermistor function — variant 13
- Check: coolant thermistor function — variant 14
- Check: throttle potentiometer function — variant 13
- Check: throttle potentiometer function — variant 14
- Check: idle speed actuator control function
- Check: idle speed actuator control function — variant 2
- Check: vehicle speed sensor function — variant 9
- Check: vehicle speed sensor function — variant 10
- Check: mixture regulation function — variant 7
- Check: mixture regulation function — variant 8
- Check: mixture regulation auto-adaptation function — variant 5
- Check: mixture regulation auto-adaptation function — variant 6
- Check: inlet manifold pressure sensor function — variant 11
- Check: inlet manifold pressure sensor function — variant 12
- Check: engine speed sensor function — variant 15
- Check: engine speed sensor function — variant 16
- Check: injectors control function group A (1 - 5)
- Check: injectors control function group A (1 - 5) — variant 2
- Check: injectors control function group B (2 - 6)
- Check: injectors control function group B (2 - 6) — variant 2
- Check: diesel pressure sensor function
- Check: diesel pressure sensor function — variant 2
- Check: diesel pressure sensor supply function
- Check: diesel pressure sensor supply function — variant 2
- Check: diesel pressure sensor/diesel pressure regulator consistency function
- Check: diesel pressure sensor/diesel pressure regulator consistency function — variant 2
- Check: battery voltage function — variant 5
- Check: battery voltage function — variant 6
- Check: injectors control function group C (3 - 4)
- Check: injectors control function group C (3 - 4) — variant 2
- Check: accelerator pedal sensor function 1
- Check: accelerator pedal sensor function 1 — variant 2
- Check: accelerator pedal sensor supply function
- Check: accelerator pedal sensor supply function — variant 2
- Check: group A (1 - 5) ignition control function
- Check: group A (1 - 5) ignition control function — variant 2
- Check: group B (2 - 6) ignition control function
- Check: group B (2 - 6) ignition control function — variant 2
- Check: group C (3 - 4) ignition control function
- Check: group C (3 - 4) ignition control function — variant 2
- Check: accelerator pedal sensor function 2
- Check: accelerator pedal sensor function 2 — variant 2
- Check: accelerator pedal sensor supply function 2
- Check: accelerator pedal sensor supply function 2 — variant 2
- Check — variant 3
- Check: knock regulation function
- Check: knock module function — variant 3
- Check: knock module function — variant 4
- Check: knock detection function — variant 7
- Check: knock detection function — variant 8
- Check: fuel temperature sensor function
- Check: fuel temperature sensor function — variant 2
- Check: inlet air thermistor function — variant 11
- Check: inlet air thermistor function — variant 12
- Check: inlet manifold pressure sensor function (RHZ engine)
- Check: inlet manifold pressure sensor function (RHZ engine) — variant 2
- Check: inlet manifold pressure sensor supply function (RHZ engine)
- Check: inlet manifold pressure sensor supply function (RHZ engine) — variant 2
- Check: atmospheric pressure sensor function
- Check: atmospheric pressure sensor function — variant 2
- Check: air flow meter function
- Check: air flow meter function — variant 2
- Check: ignition shunt function
- Check: ignition shunt function — variant 2
- Check: oxygen sensor heating relay control function
- Check: oxygen sensor heating relay control function — variant 2
- Check: ECU function
- Check: ECU function — variant 2
- Check: the gearbox ECU manages the following functions — variant 2
- Check: idle regulation function — variant 2
- Check — variant 4
- Check: fuel pump control function
- Check: electronic automatic gearbox information
- Check: electronic automatic gearbox information — variant 2
- Check: oxygen sensor function — variant 7
- Check: oxygen sensor function — variant 8
- Check: injection-ignition control unit function — variant 7
- Check: injection-ignition control unit function — variant 8
- Check: vehicle speed sensor function — variant 11
- Check: vehicle speed sensor function — variant 12
- Check: EGR solenoid valve function
- Check: EGR solenoid valve function — variant 2
- Check: purge canister solenoid valve function — variant 3
- Check: purge canister solenoid valve function — variant 4
- Check: function stabilisation of 5 V supply to sensors
- Check: function stabilisation of 5 V supply to sensors — variant 2
- Check: turbo pressure solenoid valve function (DW10 ATED)
- Check: turbo pressure solenoid valve function (DW10 ATED) — variant 2
- Check: function EGR butterfly solenoid valve (emission control L4)
- Check: function EGR butterfly solenoid valve (emission control L4) — variant 2
- Check: Heating circuit heater functions
- Check: Heating circuit heater functions — variant 2
- Check: pre/post heat relay function
- Check: pre/post heat relay function — variant 2
- Check: function pre-post heating warning lamp
- Check: function pre-post heating warning lamp — variant 2
- Check: low pressure fuel pump supply function
- Check: low pressure fuel pump supply function — variant 2
- Check: purge canister solenoid valve function — variant 5
- Check: purge canister solenoid valve function — variant 6
- Check: 3rd piston deactivator function
- Check: 3rd piston deactivator function — variant 2
- Check: fuel pressure regulator function
- Check: fuel pressure regulator function — variant 2
- Check: injector control function — variant 2
- Check: injectors control function — variant 2
- Check: 1 ignition coil control function
- Check: 1 ignition coil control function — variant 2
- Check: 2 ignition coil control function
- Check: 2 ignition coil control function — variant 2
- Check: no. 1 - 4 injector control function
- Check: no. 1 - 4 injector control function — variant 2
- Check: no. 2 - 3 injector control function
- Check: no. 2 - 3 injector control function — variant 2
- Check: oxygen sensor function — variant 9
- Check: oxygen sensor function — variant 10
- Check: function diagnostic warning lamp (DW10ATED)
- Check: function diagnostic warning light (DW10ATED)
- Check: clutch switch function
- Check: clutch switch function — variant 2
- Check: function double relay control
- Check: function double relay control — variant 2
- Check: ignition controlled + supply to control unit (DW10ATED)
- Check: ignition controlled +ve supply to control unit (DW10ATED)
- Check: injector 1 function
- Check: injector 1 function — variant 2
- Check: injector 2 function
- Check: injector 2 function — variant 2
- Check: injector 3 function
- Check: injector 3 function — variant 2
- Check: injector 4 function
- Check: injector 4 function — variant 2
- Check: injectors supply cut-off test function
- Check: injectors supply cut-off test function — variant 2
- Check: function high-speed control electric cooling fan unit (DW10ATED)
- Check: function high speed control fan (DW10ATED)
- Check: function fan assembly low speed control
- Check: function fan assembly low speed control — variant 2
- Check: air conditioning cut-off control function
- Check: air conditioning cut-off control function — variant 2
- Check: TL4226 circuit function
- Check: TL4226 circuit function — variant 2
- Check: FRIC (cooling function integral with the ECU)
- Check: FRIC (cooling function integral with the ECU) — variant 2
- Check: mixture regulation function — variant 9
- Check: mixture regulation function — variant 10
- Check: mixture regulation function — variant 11
- Check: mixture regulation function — variant 12
- Check: battery voltage — variant 5
- Check: battery voltage — variant 6
- Check: injection-ignition control unit function — variant 9
- Check: injection-ignition control unit function — variant 10
- Check: fuel pump relay control function — variant 7
- Check: fuel pump relay control function — variant 8
- Check: 1 - 4 ignition coil control function — variant 5
- Check: 1 - 4 ignition coil control function — variant 6
- Check: 2 - 3 ignition coil control function — variant 5
- Check: 2 - 3 ignition coil control function — variant 6
- Check: knock detection function — variant 9
- Check: knock detection function — variant 10
- Check: knock regulation function — variant 2
- Check: knock regulation function — variant 3
- Check: power steering stop information — variant 3
- Check: power steering stop information — variant 4
- Check: air conditioning information function
- Check: air conditioning information function — variant 2
- Check: vehicle cruise control switch function
- Check: vehicle cruise control switch function — variant 2
- Check: function - turbocharger pressure regulation solenoid valve (RHZ engine)
- Check: function - turbocharger pressure regulation solenoid valve (RHZ engine) — variant 2
- Check: function - pre-heater warning lamp (DW10ATED)
- Check: function - pre-heat warning lamp (DW10ATED)
- Check: fuel pressure regulator function — variant 3
- Check: fuel pressure regulator function — variant 4
- Check: function - diagnostic warning lamp (DW10ATED) — variant 2
- Check: function - diagnostic warning light (DW10ATED) — variant 2
- Check: clutch switch function — variant 3
- Check: clutch switch function — variant 4
- Check: function - double relay control — variant 3
- Check: function - double relay control — variant 4
- Check: air conditioning cut-off control function — variant 3
- Check: air conditioning cut-off control function — variant 4
- Check: circuit function TL 4226
- Check: circuit function TL 4226 — variant 2
- Check: low pressure fuel pump supply function — variant 3
- Check: low pressure fuel pump supply function — variant 4
- Check: brake switch function
- Check: brake switch function — variant 2
- Check: function - fan assembly high speed control (DW10ATED)
- Check: function - fan assembly low speed control — variant 3
- Check: function - fan assembly low speed control — variant 4
- Check: function - coolant temperature warning lamp
- Check: function - coolant temperature warning lamp — variant 2
- Check: condenser voltage function 1
- Check: condenser voltage function 1 — variant 2
- Check: condenser voltage function 2
- Check: condenser voltage function 2 — variant 2
- Diesel temperature sensor check
- Diesel temperature sensor check — variant 2
- Air temperature sensor check
- Air temperature sensor check — variant 2
- Check: end of compression pressures (DW10ATED4)
- Initialisation procedure: injection electronic control unit (1580 SPI, XU7JP)
- Initialisation procedure: injection ECU (XU7JP, 1580 SPI)
- Removing - refitting: fuel pump (DW8)
- Removing - refitting high pressure fuel pump (DW10ATED4)
- Removing - refitting injectors (DW10ATED4)
- Removing - refitting fuel high pressure common injection rail (DW10ATED4)
- Drain - refill: fuel tank
- Overhaul: injectors (DW8)
- Cleaning: unions on the high pressure fuel direct injection rail (DW10ATED4)
- Precautions to be taken: injection ignition
- Precautions to be taken: injection ignition — variant 2
- Precautions to be taken
- Precautions to be taken — variant 2
- Precautions to be taken — variant 3
- Precautions to be taken — variant 4
- Precautions to be taken: injection-ignition — variant 3
- Precautions to be taken: injection-ignition — variant 4
- Precautions to be taken — variant 5
- Precautions to be taken — variant 6
- Schematic diagram
- Replace (1.9 TD)
- Replacement (1.9 TD)
- Application: tools
- Setting up: tools
- Application: tools — variant 2
- Setting up: tools — variant 2
- Application: tools — variant 3
- Setting up: tools — variant 3
- Application: tools — variant 4
- Setting up: tools — variant 4
- Analysis: results
- Analysis: results — variant 2
- Analysis: results — variant 3
- Analysis: results — variant 4
- Analysis of the results
- Analysis of the results — variant 2
- Analysis: results — variant 5
- Analysis: results — variant 6
- Wiring diagrams: injection ignition (1580 SPI, XU7JP)
- Schematic diagram: model
- Schematic diagram: model — variant 2
- Injection-ignition wiring diagram
- Injection-ignition wiring diagram — variant 2
- Schematic diagram — variant 2
- Schematic diagram — variant 3
- Identification: system components
- Identification: system components — variant 2
- Components of the system
- Components of the system — variant 2
- Synopsis
- Summary of operation
- Help in diagnosis
- Help in diagnosis — variant 2
- Schematic diagram: injection-ignition
- Wiring diagrams: injection-ignition
- Effects of the L4 tax incentive emission control standard on the injection system
- Effects of the L4 tax incentive emission control standard on the injection system — variant 2
- Components of the system — variant 3
- Components of the system — variant 4
- Diagram of ECU inputs
- Diagram of ECU inputs — variant 2
- Diagram of ECU outputs
- Diagram of ECU outputs — variant 2
- Components of the system — variant 5
- Components of the system — variant 6
- Help in diagnosis — variant 3
- Help in diagnosis — variant 4
- Foreword — variant 4
- Classification: injector holders (DW10TD, DW10ATED)
- Classification: injector holders (DW10ATED, DW10TD)
- Check: ignition advance
- Check: ignition advance — variant 2
- Checks and adjustments: ignition advance
- Checks and adjustments: ignition advance — variant 2
- Removing - refitting: injectors (DW8)
- Emission control: EURO 3 - EOBD
- Identification: engine oil filter cartridge
- Removing: engine ECU / diesel pump
- Application: tools — variant 5
- Setting up: tools — variant 5
- Application: tools — variant 6
- Setting up: tools — variant 6
- Conditions for working on the diesel circuit: BOSCH system
- Presentation: tooling
- Presentation: tooling — variant 2
- Tooling: engine
- Tooling: (HDI) engine
- Battery
- Body
- Bodywork
- Braking
- Comfort and convenience
- Current generation
- Dashboard
- Electrical harnesses
- Engine
- Front anti -roll bar
- Front axle
- Front seats
- Front section
- Front shock absorbers
- Gearbox assembly
- General points
- General points about the vehicle
- Instrument panel
- Instruments and controls
- Lighting - signalling
- Mechanical
- Power unit
- Pre-heating
- Protections and doors
- Rear axle
- Rear section
- Roof panel
- Side structure
- Steering
- Suspension
- Transmission
- Washing and wiping