Identification after reboring
Reference a +0,6 = reconditioning of the engine
Repair
Height H
- Nominal dimension 248,00 ± 0,05 mm
- Machining permitted 0,2 mm
- Minimum dimension after grinding 247,8 ± 0,05 mm
Characteristics of the cylinder bores
| nominal dimension | repair size 1 |
|---|---|
| 85,00 (+0,018; -0) mm | 85,60 (+0,018; -0) mm |
Tightening torques
Jets at the base of the piston: tightening torque to 1.0 ± 0.1 da.Nm
Lower cover
- Pre-tightening to 1.0 da.Nm
- Tightening torque to 1.6 ± 0.3 da.Nm