ECU information available
Actuator test: no OK
Measure parameters: yes
Characterised by
- Maximum engine speed exceeded
- Coherence
Checks to be carried out if fault is present
Maximum engine speed exceeded
| conditions under which the fault appears | checks to be made conditions for checking |
|---|---|
| engine speed above 5400 rpm | control unit disconnected, ignition off, verify: - insulation of wires A, B - resistance R = 360 ± 45 Ω (between terminals 14 and 41 of the 88V.NR connector) |
Coherence
Refer to the procedure: check maximum engine speed exceeded function
