ECU information available
Actuator test: no OK
Measure parameters: yes
Characterised by: coherence
Checks to be carried out if fault is present
Coherence
| conditions under which the fault appears | checks conditions for checking |
|---|---|
| control unit disconnected, ignition on, with brake pedal released: voltage presence on terminal 73 of connector 88V.NR check: - the continuity and insulation of wire B - ignition controlled positive supply - the conformity of switch 7308 - the adjustment of the switch 7308 no voltage at terminal(s) 48 of connector 88V.NR check: - insulation of wire A - the conformity of switch 7308 - the adjustment of the switch 7308 control unit disconnected, ignition on, brake pedal pressed: no voltage at terminal(s) 73 of connector 88V.NR check: - insulation of wire B - ignition controlled positive supply - the conformity of switch 7308 - the adjustment of the switch 7308 voltage presence on terminal 48 of connector 88V.NR check: - insulation of wire A - the conformity of switch 7308 - the adjustment of the switch 7308 |
+CC: ignition controlled + supply