ECU information available
Actuator test: no OK
Measure parameters: no OK
Checks to be carried out if fault is present
| conditions under which the fault appears | checks to be made conditions for checking |
|---|---|
| engine running | ECU connected, ignition on, reference sensor disconnected verify: - presence of 12 V at terminal(s) 1 on connector 3V.BE - earth present at terminal(s) 3 of connector 3V.BE - check continuity and insulation of wire(s) A, B, C |
A 406
B 106, 206, 306
PARTNER
C 806
