Because of its high cost and the administrative leasing system, the nickel cadmium battery requires a special removal authorisation procedure
This battery should therefore only be replaced in accordance with the technical procedure defined with the supplier in order to avoid unjustified removal
Faults
- Loss of high voltage
- Loss of range
- Liquid escapes from unit (without impact)
- Insulation...
WarningIn these cases, carry out the series of checks corresponding to the incident and complete the analysis sheet (copy attached)
This analysis sheet must be faxed to the Service technical team, who will issue an exchange agreement number, by return of fax
In the case of difficulty, the Service Technical may request further information or provide technical assistance
The Service Technical team will order the new unit
The Service department will receive a despatch note by fax from the battery supplier stating the delivery date
For the return of the removed unit: see the warranty manual, brochure 7, section 07.5.4
For the reimbursement of labour charges: see the warranty manual, brochure 6, section 06.4.2.1
When a unit is damaged in an accident, complete the analysis sheet without carrying out the series of checks
State the number of the unit to be replaced and the customer's insurance company
This analysis sheet must be faxed to the Service technical team, who will issue an exchange agreement number, by return of fax
The Service Technical team will order the new unit
The Service department will receive a despatch note by fax from the battery supplier stating the delivery date
The labour costs of removal/replacement will be charged to LOCA-DIN
To despatch the damaged unit: see the warranty manual, brochure 7, section 07.5.5
For the reimbursement of labour charges: see the warranty manual, brochure 6, section 06.4.2.1
The Service department faxes the analysis sheet to the Service Technical team ticking Return for End of Life and giving the unit numbers
This analysis sheet must be faxed to the Service Technical team, who will issue a removal agreement number, by return of fax
The Service Teechnical team will order packaging for the units from the supplier
The Service department will receive a despatch note by fax from the battery supplier stating the delivery date for the packaging
For the reimbursement of labour charges: see the warranty manual, brochure 6, section 06.4.2.1
The attached analysis sheet form should be photocopied and completed in each case described in the previous sections
WarningComplete all headings to ensure optimum battery follow-up by the Service Technical team
In case of a fault: carry out the corresponding check and note the values measured on the analysis sheet
In case of destruction by accident: give the name and insurance policy number as a comment
Complete the analysis sheet (example attached)
This analysis sheet must be faxed to the Service technical team, who will issue an exchange agreement number, by return of fax
In the case of difficulty, the Service Technical may request further information or provide technical assistance
WarningIt is requested that this procedure be followed when the electronic unit or the ECU is changed outside of the warranty period (refer to the Warranty brochure paragraph 14.4.2)