Table 2, Trouble Codes
Trouble
| Code | Information Sensor |
|---|---|
| Cause of Fault | Remedy in |
F0: DATA LIST
| No. | |||
|---|---|---|---|
| Trouble Code Storage when | |||
| 55 | REPLACE ECU | - | · With ignition ON the fault is recognized immediately |
· After the engine is started, the fault is recognized after some time. This period depends on the calculation time of the microprocessor. For example, at full load, when the priority for calculation of the check sum is low, it can take several minutes.
| Effects: |
· The ABS is switched off
· The ABS telltale is switched on