Crank Drive, Cylinder Block
Cylinder Grinding and Piston Dimensions
| Cylinder | Pistons Available | |||
|---|---|---|---|---|
| Size | Cylinder bore j in mm " 0.005 | Coefficient for cylinder bore on crankcase | Pertinent piston j in mm | Coefficient on piston head |
| 1 | 94.95 | 5 | 94.92 | 6 |
| 94.96 | 6 | 94.92 | 6 | |
| 94.97 | 7 | 94.94 | 8 | |
| 94.98 | 8 | 94.94 | 8 | |
| 94.99 | 99 | 94.96 | 00 | |
| 95.00 | 0 | 94.96 | 00 | |
| 2 | 95.01 | 01 | 94.98 | 02 |
| 95.02 | 02 | 94.98 | 02 | |
| 95.03 | 03 | 95.00 | 04 | |
| 95.04 | 04 | 95.00 | 04 | |
| 95.05 | 05 | 95.02 | 06 | |
| 95.06 | 06 | 95.02 | 06 | |
| 3 | 95.07 | 07 | 95.04 | 06 |
| 95.08 | 08 | 95.04 | 06 | |
| 95.09 | 09 | 95.04 | 06 | |
| 95.47 | 95.47 | 95.43 | 7 + 0.5 | |
| Oversize 0.5 mm | 95.48 | 95.48 | 95.44 | 8 + 0.5 |
| 95.49 | 95.49 | 95.45 | 9 + 0.5 | |
| 95.50 | 95.50 | 95.46 | 0 + 0.5 | |
| Piston diameter must be measured at 'D'. | ||||
| .P. B8729.tif | 6 | 6 | tiff;; |