4.1.1 Anti-lock Brake System ABS 4 / 4-F F2:TROUBLE CODE TABLE
Trouble
| Code |
Information Sensor
| Cause of Fault | Remedy in |
F0:DATA LIST
| No. | ||
|---|---|---|
| Trouble Code Storage when ... | ||
| Remarks | ||
| 19 | VALVE RELAY | |
| CIRCUIT | 05, 06 | · The solenoid valve relay contact is closed (measured contact voltage greater than 4.8 V), although the relay coil has not been actuated. |
or
The solenoid valve relay contact is open (measured contact voltage less than 1.8 V), although the relay coil has been actuated.
or
With the solenoid valve relay activated, the coil current is not within the prescribed tolerance range
· The fault is recognized and stored in the following system operating phases:
Ignition ON
Vehicle operating
ABS control active
Diagnostic mode active (TECH 1 connected)
· Above conditions must be fulfilled for at least 0.028 s
If trouble code 19 was recognized, valve actuation is blocked and the ABS telltale is switched on.
The solenoid valve relay is switched off.